edc17c46 immo off

[rola1971]

hi
i need immo off of may edc17c46
old ecu totale dead no posibility read
i make immo off but still have immo activite in dash
i need good solution
thanks

[eepromdom]

hi
i need immo off of may edc17c46
old ecu totale dead no posibility read
i make immo off but still have immo activite in dash
i need good solution
thanksWhat car buddy? Vag has a cool edc17 tool I use... Can you send the original files before the modifications? Then I will give you a no safe lite no engine stop and even via obd no fault codes detected.. Perfect immo off...

[rola1971]

it is orginal file

[kuebk]

Here you go.

[playa786]

hello i need help to remove immo off an also immo error on dash,also egr and addblue off vw sharan edc17c46 can you help me

[mcab]

Try and report

[playa786]

will let you know mate thanks

[playa786]

eeprom file is empty mate

[playa786]

working great thanks

[Makubika]

your old ecu eeprom can still be read by de-soldering the ck. hip and read. I assume the bin you posted is for the "new" ECU. The SKC for that one is 13782. Try and report back. The part number 03L 907 309N, came from VIN WVWZZZ3CZCE541468. Use the VCDS method if you have the skc from cluster.

[playa786]

thank you for the information

[matthabdel34]

hello everyone and happy new year. I have a problem on edc17c46 immo off, I have the indicator light which blinks and auto hold. thank you 857837

[kuebk]

Hard to say if it helps, attach IROM to get correct solution.

[matthabdel34]

thank you for your quick response, here are the two files857839857840

[kuebk]

Test and report back.

[ecuprogramer]

I can do it good solution friend, for crack software make immo off not good BAD solution

[matthabdel34]

hi if you can help with this problem thank you very much

[matthabdel34]

hi kuebk ,file does not work it's always the same, immobilizer + auto hold indicator light

[kuebk]

hi kuebk ,file does not work it's always the same, immobilizer + auto hold indicator light

Which file doesn't work, first or second?

[matthabdel34]

second , first not tested

[matthabdel34]

the two do not work , it is as if there is an empty box in write or read

[matthabdel34]

unresolved problem, I can not remove error immo and auto hold. the car is working fine but I have two lights on. Thanks for your help

[zaki12]

I HAVE PROBLEM WITH RESETING DPF MILEAGE DISTANCE SINCE LAST REGENERATION BECAUSE I CAN'T RESET IT WITH DIAGNOSTIC TOOLS BECAUSE OF SOME ERRORS WHO CAN DO THAT FOR ME WITH ECU ORIGINAL FILE
THANK YOU