View Full Version : C4 BSI Johnson bench
rob h
29th July, 2020, 12:16 PM
Hello guys,
I am looking for a tested pinout, to wire this bsi.
Some i found, dont work.
9660105980
Johnson control Citroen C4
Bsi 2004 H05 - 01230305
this is not working,
733894
and this makes not differeces
733898
And some direct pcb connection, to read with prog, if possible.
Thanks guys
nadhir
29th July, 2020, 01:10 PM
hello my friends I tried the first image with FVDI 2018 its 100% workinghttps://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=733894&d=1596021346&thumb=1
rob h
29th July, 2020, 02:05 PM
Did not work for me.
I will remove fuse 14, and test New bsi in Car!
krisdiv
29th July, 2020, 07:07 PM
With fvdi2014 also works For reading and writing -13,5V
With fvdi 2014 also works. For reading and writing 13.5
with fvdi 2014 also works. For reading and writing 13.5
rob h
30th July, 2020, 08:33 AM
Yes, fvdi works.
I tried smok and launch, they did not.
The upper pinout, and red pin 2, turns on and off
nadhir
30th July, 2020, 10:45 PM
thank you for your answer which helps us a lot
dtip
31st July, 2020, 12:28 AM
are you guys using this pinout to read flash or eeprom?
nadhir
31st July, 2020, 02:47 PM
read flash and eprom with FVDI
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.