EDC17C06 Locked BMW 118D 143

[AKH84]

Hi,
I read ori file by OBD with Kess, tune file and write by OBD, car don't start.
I read ecu with Ktag tricore and file was only 845ko...
I try to write backup tricore (downloaded on internet) with Ktag but no change.
What is wrong why the car don't start ?
Thanks all

[tomasz15071985]

you have to do immo synchronization (inpa)

you have to do immo synchronization (inpa)you have to do immo synchronization (inpa)

[tomasz15071985]

you have to do immo synchronization (inpa)

you have to do immo synchronization (inpa)you have to do immo synchronization (inpa)

[Lambda1]

For sure you use clone tool... and thats the simple result :)

[AKH84]

yes but why the car don't start with backup writed with Ktag? i don't have immo dtc, no dtc

[Trice1001]

Write Original file car must start. with clone tool too. Do many times.

BMW is problem flash edc17 with clone tool , vw passat ect edc17 no problem

[Lambda1]

It is bmw car mate...
You can not write obd file via bootmode... and also you cant write a "backup" from another ecu ... because OTP section other ISN ...

[jurebv]

if written tuned file by obd without removing TPROT then ecu is in locked state, read in boot mode and post here, i will unlock it for you

[sdtsedat]

Is TPROT, sent me full backup ktag and obd read, i sent you recover file to write. If immo not damaged..

[AKH84]

Thanks to all want to help me, i write correct backup ktag and car start