View Full Version : vw golf 4 immo problem
demporio69
12th August, 2020, 08:52 AM
Hello. I have a problem with immo and I get a fault: "Engine start blocked by immobilizer". I tried to programming the key and the engine started, but after a while I turn off the engine and I get the same fault code again and the engine does not want to start. What are the possible problems?
VW Golf IV
2.0 gasoline
2000y
robert1232
12th August, 2020, 08:56 AM
send file from ecu
i did for you off immo if you want
demporio69
12th August, 2020, 09:03 AM
I want to find a problem. If a problem cannot be found, the next option will be Immo OFF. :)
Panathaole
12th August, 2020, 09:28 AM
Check your wire's, if everything ok, solder all the parts in the ecu, you may have somewhere bad sordering...
demporio69
12th August, 2020, 10:45 AM
maybe you know which wire check? When I turn on the ignition, dashboard does not immo light up
lesakljucevi
12th August, 2020, 10:58 AM
Check soldering on instrument on green connector
Послато са Nokia 3.1 Plus помоћу Тапатока
demporio69
12th August, 2020, 02:13 PM
Which tools can I read eeprom B58258?
Bosch 0 261 206 088
06A 906 018 CS
I have only carprog.
atanaspopov
12th August, 2020, 02:21 PM
It is 24C02. Yoiu can use xprog, carprog and any usual eeprom programmer
demporio69
12th August, 2020, 03:16 PM
When i try to read eeprom. I get bad dump file
demporio69
12th August, 2020, 03:25 PM
Who can do immo off?
kiszka
12th August, 2020, 10:04 PM
Who can do immo off?
press buttons
https://mega.nz/file/AnBQUaqR
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.