Opel Vectra C EGR OFF + LC (if possible)

[wojtas.87]

Hello guys.

Could somebody turn off EGR and add LC (2500RPM) in my dump?

Vectra C 1.9CDTI 150bhp
EDC16C9

Dumped with MPPS 1MB.

[Leak]

Test and reply pass pm.

[wojtas.87]

Test and reply pass pm.

Unfortunetely it doesn`t work. Writing is fine but after it traction control light comes on and fuel pump doesn`t start. Please turn off swirl flaps too becouse I`ve mounted inlet manifold without this shit.

[Leak]

Here is your file with egr off and flaps. Test and reply after.

[wojtas.87]

Here is your file with egr off and flaps. Test and reply after.

Same problem as above. TC light, fuel pump doesn`t work and car can`t start.

[cascais]

Here there is 3 files in the rar try first vegroff.bin if car starts everything should work perfectly fine

Pass by pm

[wojtas.87]

Pass by pm

THX, please send me the pass please ;)

[cascais]

you must press the buttons so you can get helped bro :)

[wojtas.87]

Here there is 3 files in the rar try first vegroff.bin if car starts everything should work perfectly fine

Pass by pm

Unfortunetely "Conditions not correct" with Your files. I tried all 3 of them.

[cascais]

Try this one same pass

[wojtas.87]

Same story - "Conditions not correct". Ori file writes fine every time.

[Bllinda]

I think that’s the main reason ;)



Same story - "Conditions not correct". Ori file writes fine every time.


Join Date : May 2010
Posts : 10
Thanks : 0
Thanked 0 Times in 0 Posts

[wojtas.87]

I think that’s the main reason ;)

I`ve improved it but still nothing ;)

[wojtas.87]

Here is your file with egr off and flaps. Test and reply after.

This file works perfectly but I have to write it by galetto v54 via OBD. MPPS can`t write it... strange