edc16 maf off

[supremeza]

Hi all,


anyone able to assist me with maf to map switch on the attached file and the removal of error code (p0100 08)


p0100 08 mass or volume air flow circuit malfunction

i have replaced the maf and had the wiring checked the issue is the ecu

[mysterious]

Here you can try

[supremeza]

thanks i have written your file onto the ecu i still get the p0100 08 mass or volume air flow circuit malfunction,(with maf plugged out) i then plugged it back in and the car drove ok for bit then the back to limp mode no error codes

[mysterious]

But if you plugged out is limp mode present or no? Or all ok just you have p0100 08?

[supremeza]

if i plug it out limp mode is present and p0100 08 code. if i plug in the maf the car has no error codes but the limp mode then doesnt allow revs over 3000rpm

[chrisimerk]

hi to do a full maf off for this car you need to bdm read as there are p codes in the other bank which obd reads only reads 1 bank so that code will keep coming back

regards

[supremeza]

thanks to everyone for your inputs a special thanks to Mysterious for going out of your way to help me