PDA

View Full Version : VW POLO 1.2 DCM3.7 CHECKSUM CORRECTION



momogsm
28th August, 2020, 11:04 AM
Hi All Dk Members

Please I Need Your Help To Correct Checksum In VW Polo 1.2 With ECU DCM3.7

I Want To Correct Checksum In Original File And In Modified File Also

File Readed By KESS

Thanks In Advance

maicson
28th August, 2020, 11:05 AM
you can write it by Kess will correct checksum if you have good Kess

momogsm
28th August, 2020, 11:07 AM
you can write it by Kess will correct checksum if you have good Kess
Hi

Kess Say Checksum Error, So I Need Checksum Correction,

Thanks

maicson
28th August, 2020, 11:09 AM
can you contact alientec they will fix your problem

momogsm
28th August, 2020, 11:49 AM
can you contact alientec they will fix your problem
Hi

I Can't Contact Alientech Support,

Thanks

voltechcar
28th August, 2020, 12:17 PM
china tool, time to buy genuine.

momogsm
28th August, 2020, 12:28 PM
china tool, time to buy genuine.
Hi

Yes, For The Moment, So Is There Someone Who Can Correct Checksum For Those Files

Thanks

Johnsy1998
28th August, 2020, 04:26 PM
Checksum error on a Clone kess, usually means uninstall all versions off KESS then install again and problem will most likely be fixed. although you should go genuine since you will eventually brick an ECU and then end up paying out.

kospoz
28th August, 2020, 10:56 PM
Do not play with this ecu mate because will be your nightmare. Pcm flash can do this job it is not expensive tool