View Full Version : Zafira B 1.9 please dpf off
majster10
2nd September, 2020, 06:08 PM
hello friends i need dpf off zafira b 1.9 edc16c39 my brother bought the car with a DPF fault and a cut out filter.Flash read Ktag
PelsonBMW
2nd September, 2020, 08:03 PM
your file dfp dtc off , pass pm
mrjay88
2nd September, 2020, 08:10 PM
hello friends i need dpf off zafira b 1.9 edc16c39 my brother bought the car with a DPF fault and a cut out filter.Flash read Ktag
Here u go test and report pass in pm dont forget hit the thanks if i helped
majster10
3rd September, 2020, 02:39 PM
Thank you but this solution does not work. Auto only drives a few kilometers fine then max 3000 rpm. Volta solution ECUsafe dpf remover not working.Please help.
carbon7319
3rd September, 2020, 03:15 PM
Write you org software , delete errors after that , drive you car some time , read errors after that and post here.
majster10
3rd September, 2020, 03:45 PM
ok tomorrow i will do as you say
PelsonBMW
4th September, 2020, 09:52 AM
try this one no pass -suddenly ive mistaken and removed egr xD
voltechcar
5th September, 2020, 08:49 AM
ecu decoder edit to much....... also to much switch from dtc?
majster10
7th September, 2020, 09:01 AM
friends, someone can check if the ori file is correct, maybe someone has tried to cut the dpf number ECU-0281013593 before
majster10
7th September, 2020, 12:50 PM
error P2452 on the original file
majster10
9th September, 2020, 09:54 AM
can anyone help?
robert1232
15th September, 2020, 06:59 AM
Hello need to disable EGR and dpf
but not volta and ecusafe
thanks
robert1232
15th September, 2020, 12:06 PM
any help??
majster10
15th September, 2020, 05:13 PM
thanks i will check
majster10
15th September, 2020, 05:42 PM
ktag-checksum error
majster10
17th September, 2020, 08:42 AM
I checked the car does not start
bobolin4o
17th September, 2020, 08:55 AM
I checked the car does not start
Nice... what to expect, when Ktag told you, that the checksum is not correct...
Flash back the file, which you read initially, the car should start!
Make SPS programming with GM GlobalTIS, then read again the flash with Ktag and post it here...
Be professional, mate!
Or... you can flash my file... but if your Ktag don't make a checksum - the car will not start again.
majster10
17th September, 2020, 11:54 AM
thank you, I get to work
majster10
17th September, 2020, 01:35 PM
your file is running now fuel pressure problem thank you:dead:
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.