PDA

View Full Version : X6 2010 CAS3+



LITFRA
7th September, 2020, 10:34 PM
Hello,

Could you check my flash and eeprom. After mileage reset with DP4, error EWS tampering in DDM.
From the new write flash and eeprom, car started. Does not start again when the engine is switched off.


Thank you in advance


743397

ecuprogramer
8th September, 2020, 07:03 AM
hi you problem cas3+ eeprom

KM: 0 km
ECU synchronize code: FFFF

his Cas worl with ECU and Gearbox syncrhronize code,not use ecu isn

please upload ecu type and flash file+eeprom from ecu or read ecu ISN number and upload me

old mileage = 388149km

LITFRA
8th September, 2020, 09:52 AM
743465
743466
743467

Chriz123
9th September, 2020, 04:02 AM
can you post page3 cfg from key?

LITFRA
9th September, 2020, 07:32 AM
DME ISN BB3357BB3357BB3357BB3357BB3357BB
DME-CAS password 62FB
CAS EGS ISN 711262FB

hipolitogt
9th September, 2020, 07:43 AM
delete you inbox messages, anyway, here you are. Flash tested. Use your original eeprom. Maybe you need to flash it with ISTAP/Autel/winkfp...

ecuprogramer
9th September, 2020, 08:02 AM
DME ISN BB3357BB3357BB3357BB3357BB3357BB


ecu isn number not good,please read good tool long isn number original to car

LITFRA
9th September, 2020, 09:30 AM
delete you inbox messages, anyway, here you are. Flash tested. Use your original eeprom. Maybe you need to flash it with ISTAP/Autel/winkfp...


Write flash, no ignition

dimon9555
9th September, 2020, 11:33 AM
please read good tool long isn number original to car


In the dump you can see that the engine control unit EWS3 - what is the long ISN to read ???)))

LITFRA
9th September, 2020, 05:03 PM
EDC16CP35 EEPROM

Please read long ISN.