Peugeot 307 cc 2003 VAN Remote control programming problems,

[AndrewStone]

Hi guys, i have problem to programm a remote control to BSI, client come to with keys, that have seperate remote control motherboard, and transponder, key starts car but i can't programm a remote key to car, key is with 2 button, in BSI i saw that 2 remote control are adapt, and that it! Are remote controls need to be NEW, can it readapt used ones to car, our it's need to be a bradly new, please some one help me!

[kiszka]

Hi guys, i have problem to programm a remote control to BSI, client come to with keys, that have seperate remote control motherboard, and transponder, key starts car but i can't programm a remote key to car, key is with 2 button, in BSI i saw that 2 remote control are adapt, and that it! Are remote controls need to be NEW, can it readapt used ones to car, our it's need to be a bradly new, please some one help me!
separating the transponder from the remote control
the remote control is only suitable for the basket
you need new remote controls

[AndrewStone]

separating the transponder from the remote control
the remote control is only suitable for the basket
you need new remote controls

Client come to me with that key already, and tell that remote control not working, client tell me that key was ordered in PSA center, and some problems on key, but im open a key and see inside PC7936 and seperate motherboard, and in this point i have some qustions, because i have key for 206 model, and there is PC7961 inside and transponder is on PCB so i'm was confused !, so if i understood i need write a new keys, when i write immo it's also will write remote code inside BSi is this correct? and after i need to sync thru a ignition lock?

[Weasel3]

separating the transponder from the remote control
the remote control is only suitable for the basket
you need new remote controls
You confirm only new when separated?

[vialli]

because i have key for 206 model, and there is PC7961 inside and transponder is on PCB so i'm was confused !, so if i understood i need write a new keys, when i write immo it's also will write remote code inside BSi is this correct? and after i need to sync thru a ignition lock?

I programmed this china key with pcf 7961 ( 2 buttons, fixed blade) to a Peugeot 307, 2003 year and the remote control worked and engine also started

[fred77]

I went to one guy who had 4 China keys from different sellers on ebay
Non worked he throw all in bin. I only was there to do KEYDIY and that didn't work either :beheaded:

Ended up fixing his original - that worked :)



Unless ordered to VIN you could be wasting hours off your life

[vialli]

Compared to this case, I can say that I was lucky

[AndrewStone]

I programmed this china key with pcf 7961 ( 2 buttons, fixed blade) to a Peugeot 307, 2003 year and the remote control worked and engine also started
looks like this key original is not so good, because on PCB is no transponder located, and there was only remote Valeo PCB inside, and Transponder seperate, i i have key for Peugeot 206 with PCF7961, all same except blade, so can i programm it to car? if i change a blade?

[AndrewStone]

And Remote for this car is programming togehter with immo?

[musti418]

Yes. immobilizer together at the same time

[AndrewStone]

Yes. immobilizer together at the same time
Ok i'm programm my key with immo togehter i see in BSI one key and one remote, but still no luck , sync with 10sec made several time still no luck!

[nazz2]

Watch out for this scenario boys, what happens when you get a early 307 or 206 2 button remote to do a spare remote? you program the customers remote+ your one but you only end up with the new remote working!!

The problem is if the transponder chip comes from a normal working key and the customer puts that chip in his working remote key, with a lost chip , you will know what will happen if you program this key+your new remote key, yes you will end up with one remote key, So give them a disclaimer and explain the situation to them, because it happened to me! ended up doing 2 new original remote for them for the price of one.

So from now on i only add a new remote if their remote is faulty or if they have a normal key, and want to add a new remote key.1 working remote+a new remote, i will explain above.

[Manta1600]

Today I had 307 2002 AKL

I told the custumer that I can't give any waranty that remote will work

I used KD and tried CIR57 and old 307 - the car start but no success with the remote

[AndrewStone]

Watch out for this scenario boys, what happens when you get a early 307 or 206 2 button remote to do a spare remote? you program the customers remote+ your one but you only end up with the new remote working!!

The problem is if the transponder chip comes from a normal working key and the customer puts that chip in his working remote key, with a lost chip , you will know what will happen if you program this key+your new remote key, yes you will end up with one remote key, So give them a disclaimer and explain the situation to them, because it happened to me! ended up doing 2 new original remote for them for the price of one.

So from now on i only add a new remote if their remote is faulty or if they have a normal key, and want to add a new remote key.1 working remote+a new remote, i will explain above.
i will try to replace a BSI module maybe it’s faulty

[AndrewStone]

Ok, i'm finally got it, Remote control is add to PCF7936 some remote control data are add in pcf so question, will china keys work, and maybe some one can reuse old one remote, i find a threat that is possible!