BMW E36 BOSCH 0261203660 CANT BYPASS IMMO WITH JULI( ) EMULATOR

[Panathaole]

Hi

i have problem to bypass the immo in a BMW E36 with 0261203660 ecu, i use the a julie universal v103 emulator(ori), choosse 3,4,5,6 pin in emulator pcb, i edit the 0000FFD1 Line with 33 33 33 33 i write the file to a new eprom,

i connect + to pin 54 immo to pin 81 and ground to pi 34, but car still be blocked.....

i have the blue light in emulator almost for two sec on and off for very litlle time....

what i am doing wrong?

i try to post in official site, but i couldn't.... it is possible to have corrupted flash? in 0000FFC0 line i have no numbers, i see other files and it have....

745190 745192 745193

745198

745200

[Andreastech81]

+12volt battery is goin to 56 pin i think ...

[Panathaole]

+12volt battery is goin to 56 pin i think ...


i check the power..... it have +12 in pin 54........

[Andreastech81]

i think 54 pin at that ECU is the power going to the Fuel pump relay or something like that (that is why is on for just 2 sec)

see wiring diagram to be sure

i think you have to move it to 56 pin

[Panathaole]

i think 54 pin at that ECU is the power going to the Fuel pump relay or something like that (that is why is on for just 2 sec)

see wiring diagram to be sure

i think you have to move it to 56 pin

according to the draw i must connect pin 54.........


745221

the other weird is when i try to start the engine the rpm meter don't move at all....

[Volker]

File seems ok....compared with an ori file there are only difference in chks and software-number

[Panathaole]

File seems ok....compared with an ori file there are only difference in chks and software-number


i don't think this flash need cks correction...... carl@bimmo did not mention this in any manual.....