Immo off Mitsubishi pajero sport

[aboazam]

Hi my friend I need help with Mitsubishi pajero diesel 4 cilender model 2003 lost key I trying to program key with transporter d4 61 via SBB and more tool no way to set key
So need immo off for ecu read via kTAG ecu e6t01871
Thanks for help

[djbon]

please try and report

[aboazam]

Thanks tomorrow I will trying and reporting

[aboazam]

Pass please my friend

[djbon]

test and try?

[aboazam]

Hi my friend car not start can you trying another file do you try this file befor

[djbon]

Hi my friend car not start can you trying another file do you try this file befor

It is from my own truck..immo is supposed to be deleted :(

[aboazam]

hi friend how can I program key for this car I tiered from it

[djbon]

do you dump from original ecu and new ecu?? if so i can make new ecu work with original key and immob box

[aboazam]

I can backup orginale file to ecu but how program key with any tool I try MPV SBB2 ftdi gscan2 skp900 with transporter d4 61 no way to program key

[achaccha]

Can you please tell which motor series it is exactly?
is it a 4M41 diesel engine?
regards

[aboazam]

Yes it is 4m41

[klaudio]

This uses id60 friend, you will never program it with id61, write original file and try

Sent from my SM-G955F using Tapatalk

[aboazam]

My friend I tried 4d60 car not accepted

[klaudio]

What's the vin or frame number, I did an Airtrek yesterday, it locked me out for about 15 minutes before I could try again, was using wrong transponder, once it let me in accepted transponder

Sent from my SM-G955F using Tapatalk

[klaudio]

When you did the programming did it ask if you want to program that key? If it did it should program as long is the right Id, if it said unable ecu is locked

Sent from my SM-G955F using Tapatalk

[aboazam]

https://www.vindecoderz.com/EN/check-lookup/JMBLYV78W8J001667

[klaudio]

JMBLYV78W8J001667 Mitsubishi Pajero 2008


2008 Should be id46, try pin 1803 5176, do you have immo part number to make sure

Sent from my SM-G955F using Tapatalk
https://uploads.tapatalk-cdn.com/20200922/bf2d7faa176e9f289cc43602a26e17af.jpg

[achaccha]

These vehicles are a bit complicated to program on the vehicle itself. In the first place you have to have the key in a good position so that it captures the antenna and if it is out of position it will not program. these use 4D61 and others 4D60. You just have to have the transponder and the correct pin code well located