Vauxhall Astra h vxr ME7.6.2

[AperoMyke]

Hello everyone I am having difficulty finding the right cards to remap my Astra vxr.
How do you manage to find the maps on Winols?
Gar there I have a list of 60 different maps and that 7 on ECM titanium lol

A little lost, thank you for your help! :beerglass:

I'm french, sorry for my bad english.

I attach my file if you can help me :beerglass:

[Antastra1989]

use this to compare maps
regards.

[GianniNOS]

Hi, i know that me 7.6.2 is dangerous to write, how tool do you use for to do it?

[supremeza]

I use kess V2 clone never had any issues

[GianniNOS]

your kess haven't advice when you choose me 7.6.2?

[supremeza]

It does but I haven't picked up any issue I just make sure I have a battery charger connected when writing

[AperoMyke]

use this to compare maps
regards.

thank you i will watch this :cheers:

I already have a stage 1 map, but I'm looking to add the pop and bang only in sport mode, so as not to have it all the time in normal mode.
that's why I'm looking for maps :) and also understand how it works I'm curious lol
Thanks for your help

[AperoMyke]

I can only find 4 injection maps.
Can you help me find the other maps please :)

[AperoMyke]

hi team, how to do a launch control on a me7.6.2? I think I managed to do a stage 1 it works pretty well lol but I would like to have a little Launch control for fun

[supremeza]

i dont think launch control is possible on this ecu i have been looking for this option for quite some time now

[chrisimerk]

it can be done with stationery rpm limit which will give you a soft limiter not anti lag etc

[AperoMyke]

it can be done with stationery rpm limit which will give you a soft limiter not anti lag etc

Hi chrisimerk,
you would not mind coming to help me please.
I look at your posts and I see that you know what you are talking about!
and if at the same time you could also check my stage 1 maps file that I did, I don't know if I did that well ...
I thank you for your time :beer:
Myke

[chrisimerk]

Hi chrisimerk,
you would not mind coming to help me please.
I look at your posts and I see that you know what you are talking about!
and if at the same time you could also check my stage 1 maps file that I did, I don't know if I did that well ...
I thank you for your time :beer:
Myke

Hi friend i have looked at your stage 1 and i have to say not bad but could be way better you are missing various maps to make this tune much better
maps that are missing are:

RLVMXN - Maximum volumetric flow with open throttle valve (11x1) boost monitoring over throttle body

KFMSNWDKVP - Normalized Airflow over TB (8x16)

TABLDOBN - Down regulation interval for LDR overboost (8x1)

RLMXLDO - * Calculation of max boost/load (3x1)

VNMX - Speed for activating rased RPM limit (1x1) this will be stopping you getting your raised rpm to 6500 as you got it set at standard which is 190mph

TMOTNMX - Temp threshold for activaton of rased RPM limit (1x1) you can lower this if you want but i would set it at 90deg so it will raise rpm ones at optimum temp

KFMDBGRG - Value of torque limit dependant of TMOT and speed (7x4)

You sort these maps and it will be much better its probably holding back and not getting the full potential from it.

i have attached map pack which will make it much easier to sort these missing maps out and also a stage 3 popbang 5k+ tune to compare do not use this unless you have modified inlet exhaust and fmi as it is a tested 300+bhp tune.

pass in pm

regards

[AperoMyke]

Thank you for your help, your information will be very useful to me! I continue to work on my stage 1 map and will give you a report before inserting the cartography in the astra vxr, to be sure not to do anything stupid and break the engine.
Thanks again for your time

[Antastra1989]

Chrisimerk cant send you private message inbox full

[AperoMyke]

I am lost in view of the number of maps corrected for a stage 1 ....

So I found 12 maps changed to be optimized.

thank you for your information I continue to look for the% because I have no information on the number to change.

thank you again friend !

[chrisimerk]

Chrisimerk cant send you private message inbox full
Pm me now mate

[chrisimerk]

I am lost in view of the number of maps corrected for a stage 1 ....

So I found 12 maps changed to be optimized.

thank you for your information I continue to look for the% because I have no information on the number to change.

thank you again friend !

Use the map pack I provided it has all the necessary maps to change for stage 1 plus

Regards

[AperoMyke]

a first for me the insertion of map pack lol
if I understood correctly here is the photo :nevreness:
I still have found how to save it in .bin

[chrisimerk]

a first for me the insertion of map pack lol
if I understood correctly here is the photo :nevreness:
I still have found how to save it in .bin

just click on import map pack then select the one i sent my map pack has way more maps then the one you have made

regards

[AperoMyke]

Thank you :)

[AperoMyke]

:embarassed:

[chrisimerk]

Here you go dyno tested stage 1 file use this or compare with your file this file is ok to write straight on

regards

pass in pm

[AperoMyke]

I don't know how to thank you!
I test it tomorrow noon directly :)
and I'll get back to you;)

cordially, Myke

[AperoMyke]

Small return
So with your carto: The car behaves like the original but with more cv. (lambda sensors behave normally)

With mine: Completely different car, big thrust in 3/4/5 / 6th but nothing in 1 / 2nd speed.


This is where I see that I am missing some settings to have something homogeneous to the original carto.


Thank you for your help and for showing me the different maps on my Astra!

Looking forward to read it again

Sincerely, Myke

[chrisimerk]

Your map you are pushing too much boost more fuel hight torque curve if standard clutch won't last that long too much for standard car this is a safe map put the stage 3 if you want loads of gains lol but would not advise with standard car

Regards

[AperoMyke]

Hi, no, that suits me perfectly with your mapping.
just the breaker has 8000 rpm :o
this is the card for re at 6400 rpm?
thank you
Myke

[AperoMyke]

Hi, how are you ?

So if I understood correctly, you just changed the injector stop time to 65535.
the breaker was still there lol
on your file the downtime at 6080 was longer. (42598)

Did I understand the principle correctly?

Thank you :joyous:

[AperoMyke]

Hi,

which brings me to
a cold engine breaker at 32,500 rpm
and at a temperature 90° of 6500 rpm
is that possible?
thank you

[peechie]

Can someone look at my Stage 1 for my Astra H VXR?

3rd gear boosts very well and then hit limp mode in 4th :(

Toy'd with a few maps and haven't had a problem

PS, sorry for hijacking. Just thought this post has people with knowledge of 7.6.2

[AperoMyke]

Can someone look at my Stage 1 for my Astra H VXR?

3rd gear boosts very well and then hit limp mode in 4th :(

Toy'd with a few maps and haven't had a problem

Hi,

KFMDBGRG - Valeur de la limite de couple en fonction du TMOT et de la vitesse (7x4) (AE04C)
ok corrected on the picture.

the 2nd map (73a24) to modify, but I don't have the potential map to do it for you.

Otherwise all other maps are ok

attach your original file, so that I look for more info and the default code number if you have one.

Myke

[Antastra1989]

Can someone look at my Stage 1 for my Astra H VXR?

3rd gear boosts very well and then hit limp mode in 4th :(

Toy'd with a few maps and haven't had a problem

PS, sorry for hijacking. Just thought this post has people with knowledge of 7.6.2

CHANGED 2 MAPS

[peechie]

Hi,

KFMDBGRG - Valeur de la limite de couple en fonction du TMOT et de la vitesse (7x4) (AE04C)
ok corrected on the picture.

the 2nd map (73a24) to modify, but I don't have the potential map to do it for you.

Otherwise all other maps are ok

attach your original file, so that I look for more info and the default code number if you have one.

Myke

Here is my Ori thanks

[AperoMyke]

hi, test that ;)
there are a lot of things wrong with your file

a++ Myke

don't hesitate to send us your feedback :)

[bulgarianman83]

Hello,
can someone please provide a password for archive:
https://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=746476&d=1600613912
Thanks

[bulgarianman83]

Nobody?
AperoMyke (https://www.digital-kaos.co.uk/forums/member.php/723417-AperoMyke)
Antastra1989 (https://www.digital-kaos.co.uk/forums/member.php/680946-Antastra1989)
?