vdiag
19th September, 2020, 10:19 PM
Lots of people are having issues with the following DTC (P010129 - MAF Sensor 1, invalid signal received) on the E-Class W212 Delphi CRD3.5 (type 2). Often it turns out to be a leak from air intake pipe hose or a very dirty air filter, sometimes even dpf-related. But if, for any reason, the fault code can't be cleared after following all the official procedures, then is it possible to make a "DTC-off" solution? I've attached ori ecu dump. Thanks in advance for your help. :friendly_wink: