PDA

View Full Version : Iveco edc17cp52 DPF off



JoeBB
25th September, 2020, 06:46 PM
hello anyone has solution working without message on dash "regeneration not completed" . i already tried ads and ecu decoders solution with switches and all dtc off and no good.

jurebv
26th September, 2020, 08:58 AM
reset with good original diagnostic, autocom clones dont reset it good, all message about regeneration must dissapear on ori ! if you cannot reset with diagnostic follow this procedure to start regeneration manually

write ORI file back, warm engine to 90C° working temperature, start engine and put in parking/idle and shut off . Then ignition on and press&hold both throttle and brake pedal until DPF light start flashing (takes a few tries until it works) Release both pedals and start the engine without touching any pedals.Let the regeneration complete (cca.20-30mins)after then shut off engine and write DPF off file.

here is dpfoff file you write after this