need help with good file transit connect 2T1T 14B321 AC

[motocarlos]

Hello,

a have a Transit Connect from 2007 with an front crash and driver airbag and passenger side pretensioner open.

Now the new driver airbag is on place, but i wait for the belt pretensioner passenger to install,

but stored on the ecu crash in memory and i need to make the car run again.

I need help to check if the files upload here is good or not, or some good dump for this ecu.

Ecu: 2T1T 14B321 AC 0285001955

Regards.

[alby01]

Hello there are two files inside zip, try both....

pass in PM

report and thanks

[motocarlos]

Hello there are two files inside zip, try both....

pass in PM

report and thanks

Hello,

what is the good file you send??

Regards.

[vadim bogat]

clear plis

[alby01]

try both, there are two files cleared with different tools

[motocarlos]

try both, there are two files cleared with different toolsTkx, i will try it and report back.
Regards.

Enviado do meu SM-A405FN através do Tapatalk

[motocarlos]

try both, there are two files cleared with different toolsHello,
The crash file is ok car run again but now always error from airbag passenger side but this car dont have it.
Another file good?

Regards.

Enviado do meu SM-A405FN através do Tapatalk

[hasankrgc]

test and report

[Alex77ae]

is the vehicle from USA market?

I usually buy from tachosoft or carprog

[motocarlos]

is the vehicle from USA market?

I usually buy from tachosoft or carprog

Hello,
the car is not from USA, its from Portugal.

Regards.

[motocarlos]

test and report

Hello,

i will try it and report back.

Regards.

[motocarlos]

test and reportHello,
Not work too, error passenger side and the car doesnt have airbag passenger side, any other solution?
Regards.

Enviado do meu SM-A405FN através do Tapatalk

[dragon100]

I think you can use elmconfig soft with cable elm327 or els327 and change configuration ...

[motocarlos]

I think you can use elmconfig soft with cable elm327 or els327 and change configuration ...

Hello,
i have buy a used ecu, i will try it on the car.

Regards.