Peugeot 206 SW 0261208101 ME7.4.4 Virginize

[bobasspr]

Hello i have problem with Pug206 - i have changed ECU and now i have only "?????" in measurmet parameter.
I upload Flash and eeprom. could someone virginize file? I have pass code. Old ecu is damaged.
Thank Yoy very much.

[ekam2]

95160 have incorect filesize 2064.

[CarCity]

Hello i have problem with Pug206 - i have changed ECU and now i have only "?????" in measurmet parameter.
I upload Flash and eeprom. could someone virginize file? I have pass code. Old ecu is damaged.
Thank Yoy very much.

https://www.digital-kaos.co.uk/forums/showthread.php/619866-Bosch-ME7-4-4-Flash-and-EEprom-collection

[bobasspr]

my noumber of ecu is 9648482980, i try couple of times but i have still file size 2064... what can i do wrong?? Im read by wellon programmer.

[ekam2]

What eeprom you have chosen. Try another manufacturer.

[bobasspr]

st 95160
But now i upload file readed by Xprog like m95160 - could you check?

[kiszka]

st 95160
But now i upload file readed by Xprog like m95160 - could you check?
this one is a good reading

[ekam2]

Try and report.

[ekam2]

Ecu pin 2P6A

[bobasspr]

unfortunately something is wrong because now i don't have any communication with ecu. I have second ecu, But this ecu was readed by short LPT cable, yesterday i was have couple of problem with stable communication with programmer - today i have brand new short 25cm cable and reading is without any errors. i'm upload flash and eeprom

[rafal]

here virgin files...................

[bobasspr]

Yeap, car is start, engine work smootlhy, but in memopry is 3 dtc
1) Ovearheat lamp fail
2) MIl lamp fail - OFF (but lamp in dash is ok, on ignition is lighton)
3) Immobiliser Key incorrect/ not programmed
But real problem is TEMPERATURE of coolant - ITS STILL 20'degres. Radiator fan dont know what kind of temp is, and are still of.
Rest of parameters i think is ok. Could you tell me why i have still 20'D of coolant? In Telecoding when i change 3 or 1 radiator fan temp still 20 and radiaor is off ( cololant is boiling)

[bobasspr]

Yeap, car is start, engine work smootlhy, but in memopry is 3 dtc
1) Ovearheat lamp fail
2) MIl lamp fail - OFF (but lamp in dash is ok, on ignition is lighton)
3) Immobiliser Key incorrect/ not programmed
But real problem is TEMPERATURE of coolant - ITS STILL 20'degres. Radiator fan dont know what kind of temp is, and are still of.
Rest of parameters i think is ok. Could you tell me why i have still 20'D of coolant? In Telecoding when i change 3 or 1 radiator fan temp still 20 and radiaor is off ( cololant is boiling)

[bobasspr]

Please hellp. Car still have 20.C degres. Radiatro fan still off. Please. Thank You.

[kiszka]

Please hellp. Car still have 20.C degres. Radiatro fan still off. Please. Thank You.
You cut two wires near the ecu
if so, connect them back
possibly the lack of a working key