help plz simenens sid206 sync ford focus 2009

[ayoub laghrissi]

Hello all i have prb with clone ecu sid 206 from ford focus 2009.ols ecu no comunucation wtih diagnose and ktag.
Could someone help me with sync ford focus 1.8tdci ecu SID206, dash withe mcu MC9S12H
in att eeprom from ecu 95320 and dash mc9s12
i try with soft FORD ALL IN ONE but no work.*
thanks in advance

[Panathaole]

Hello all i have prb with clone ecu sid 206 from ford focus 2009.ols ecu no comunucation wtih diagnose and ktag.
Could someone help me with sync ford focus 1.8tdci ecu SID206, dash withe mcu MC9S12H
in att eeprom from ecu 95320 and dash mc9s12
i try with soft FORD ALL IN ONE but no work.*
thanks in advance


if you can't communicate with diagnostic tool, maybe the ecu or cables, fuses have problem, you should see the ecu in diagnosis i think, with immo error...

[comizelu]

Done one with forscan no problems.

Sent from my MI CC9 Pro Premium Edition using Tapatalk

[yez]

When you connect new ecu communication is possible with use diagnosis tool with ecu? New ecu can be added with forscan. You can also rewrite the eeprom from the old ECU to the new one and the car will start

[Panathaole]

how to use forscan if there is no communication with ecu?????????

[comizelu]

how to use forscan if there is no communication with ecu?????????There is no communication with old ECU!
This is what I can understand from his post.

Sent from my MI CC9 Pro Premium Edition using Tapatalk

[kiszka]

Hello all i have prb with clone ecu sid 206 from ford focus 2009.ols ecu no comunucation wtih diagnose and ktag.
Could someone help me with sync ford focus 1.8tdci ecu SID206, dash withe mcu MC9S12H
in att eeprom from ecu 95320 and dash mc9s12
i try with soft FORD ALL IN ONE but no work. *
thanks in advance
I think some people can't read
with understanding

[ayoub laghrissi]

thanks brother for rep but new ecu is ok comunucation with ecu ok but ols ecu no comunucation
sorry for my english

[ayoub laghrissi]

if you can't communicate with diagnostic tool, maybe the ecu or cables, fuses have problem, you should see the ecu in diagnosis i think, with immo error...
thanks brother for rep but new ecu is ok comunucation with ecu ok but ols ecu no comunucation
sorry for my english

[ayoub laghrissi]

Done one with forscan no problems.

Sent from my MI CC9 Pro Premium Edition using Tapatalk
ihave just ford ids brother

[ayoub laghrissi]

When you connect new ecu communication is possible with use diagnosis tool with ecu? New ecu can be added with forscan. You can also rewrite the eeprom from the old ECU to the new one and the car will start
i do brother bu car no start immobilizer chek always present

[kiszka]

thanks brother for rep but new ecu is ok comunucation with ecu ok but ols ecu no comunucation
sorry for my english
how did something work
it says right away and not at the end


i do brother bu car no start immobilizer chek always present

dump eeprom ecu from first post is out of sync with dash

[yez]

You have two solutions to synchronize immo:
1. Add new ecu using diagnose tool for example Forscan with ELM327/ELS27
or
2. Copy eeprom with old ecu to new ecu if the numbers are the same on the new ecu and old ecu


Car must will start after this operations.
What are your current errors on the new ECU during diagnostics?

[kiszka]

You have two solutions to synchronize immo:
1. Add new ecu using diagnose tool for example Forscan with ELM327/ELS27
or
2. Copy eeprom with old ecu to new ecu if the numbers are the same on the new ecu and old ecu


Car must will start after this operations.
What are your current errors on the new ECU during diagnostics?
third option, do a manual synchronization

[ayoub laghrissi]

You have two solutions to synchronize immo:
1. Add new ecu using diagnose tool for example Forscan with ELM327/ELS27
or
2. Copy eeprom with old ecu to new ecu if the numbers are the same on the new ecu and old ecu


Car must will start after this operations.
What are your current errors on the new ECU during diagnostics?
thanks brother but for 1 solution i dont have forsacan
and 2 solution i do but not work for me brother

[ayoub laghrissi]

third option, do a manual synchronization
How brother ???

[comizelu]

thanks brother but for 1 solution i dont have forsacan
and 2 solution i do but not work for me brotherTry the third solution that @kiszka gave you.
Upload dash and new ECU

Sent from my MI CC9 Pro Premium Edition using Tapatalk

[kiszka]

How brother ???

test file eeprom
https://mega.nz/file/piRhEaCI

[carmoh]

hi bro

your ecu dump synchro

[ayoub laghrissi]

test file eeprom
https://mega.nz/file/piRhEaCI
hy brother thanks.but not work