Renault Duster 2017, MB96f6a6 dash

[supana]

Hi, please help me to correct mileage on the dash Renault Duster, 2017 with mb96f6a6, old 127430km, need 77430km. . Thanks in advance!

[jomberykaso]

mileage is in eeprom file

[supana]

The mileage is located in the dump at adr $062A0. C6 F1 01-->01 F1 C6-->dec-->127430. I've changed it to 76 2E 01(77430km), but mileage became 999999.. Then I pathed dash by Xtool and read again.. correction to 77430 by Xtool and read again. The location of mileage was changed - $06994. After changing of value at this adr the odo back to 127430.. I'm missing something.. I can't change mileage without patching dash.

[frankrayk]

The mileage is located in the dump at adr $062A0. C6 F1 01-->01 F1 C6-->dec-->127430. I've changed it to 76 2E 01(77430km), but mileage became 999999.. Then I pathed dash by Xtool and read again.. correction to 77430 by Xtool and read again. The location of mileage was changed - $06994. After changing of value at this adr the odo back to 127430.. I'm missing something.. I can't change mileage without patching dash.


You have to do ABS too.

[supana]

I did the ABS first. The mileage also in the ECM(corrected). I'm interested in mileage in the dash. Anyway thanks to all for the answers.

[marina_rv]

Then I pathed dash by Xtool and read again.. correction to 77430 by Xtool and read again. I can't change mileage without patching dash.


flud info.
MB96F6A6R_patched127430km.bin - bad dump

X-Tool patching only 28 bites.

test 248109235R_V12.00_2017_Logan2_285J21703R_full - X-Tool work.

X-Tool v11.26 ???

[supana]

I don't know what version of the device(it's not my X-tool). After each turning on of ignition the dash writes some information to dump(I checked it). I turned on the ignition one time between readings. Both dumps are 100% working(read out by MDflasher), I checked it by rewriting. I just want to change the mileage without patching. It is posible(ABS already done )?

[mra999]

Any one found solution I have also same Looking solution