PDA

View Full Version : BMW X5 dash mileage correction gone wrong.


doutlaw
2nd October, 2020, 01:55 PM
Hi guys been attempting to read the E57 clusters M35080 onboard with xprog as i have seen the clocks were a b*** to remove (i knew about the risks).
Long story short, reading failed, cluster display and clocks are now also f****.

Managed to dismantle the cluster and remove the M35080 to read it with upa, Attached is the dump. im suspecting this dump is corrupted. could someone please confirm or provide a good dump?

This new clusters mileage is (or at least was) 242,250mi whiles I needed to set it to 117,000 as the original one that was on the car.
stoyanov
2nd October, 2020, 02:13 PM
Your file with 170000km
doutlaw
2nd October, 2020, 03:11 PM
Your file with 170000km

Tried file cluster still not showing display.
doutlaw
5th October, 2020, 10:13 AM
Still looking for someone that can check if my file is correct or damaged.
Or that can send me another file. Thanks
Cllau
5th October, 2020, 10:44 AM
Still looking for someone that can check if my file is correct or damaged.
Or that can send me another file. Thanks

what year is the car and is manual or auto? :questionmark::driver:
doutlaw
5th October, 2020, 11:11 AM
what year is the car and is manual or auto? :questionmark::driver:

Its an E53 2003 diesel Auto
bmwparts
5th October, 2020, 11:56 AM
Can use this file to test.
Cllau
5th October, 2020, 12:05 PM
Its an E53 2003 diesel Auto

try this......:driver::wink:
doutlaw
6th October, 2020, 09:09 AM
Thank you friends. Looks like data was ok. Found out that one of the 1k res i connected xprog too was burnt and went open circuit.

Im attaching a photo maybe this might help someone else. See the temporary smaller 1k res which was replaced.

Thanks again for your support.https://uploads.tapatalk-cdn.com/20201006/81073c688e9497c1d231e7bdaace8d08.jpg

Sent from my Redmi Note 9S using Tapatalk
doutlaw
6th October, 2020, 10:22 AM
Last Request. can i have Stoyanov's file with 170,000Km changed to 180,000Km?
dtip
6th October, 2020, 10:43 AM
Last Request. can i have Stoyanov's file with 170,000Km changed to 180,000Km?
..........................................
bmwparts
6th October, 2020, 10:45 AM
Last Request. can i have Stoyanov's file with 170,000Km changed to 180,000Km?

Here is your file.
doutlaw
6th October, 2020, 11:45 AM
Here is your file.

Job Completed Thanks
evss
6th October, 2020, 03:12 PM
long story , short this used to be a common problem on 5/ range rover dashes when read from behind , displacing resistors or screwing them up , a little bit more info at the beginning about how you tried to read it and the fault as in clocks ,not working display blank no needles etc may have got you the answer quicker.

glad you sorted in the end , all well etc.
doutlaw
6th October, 2020, 03:51 PM
long story , short this used to be a common problem on 5/ range rover dashes when read from behind , displacing resistors or screwing them up , a little bit more info at the beginning about how you tried to read it and the fault as in clocks ,not working display blank no needles etc may have got you the answer quicker.

glad you sorted in the end , all well etc.

yeap thats the fault decribed perfectly.... at first i thought it was a prog fault. it was this morning that i checked fuses and the components at which i connected the xprog too.
Thankfully it was straight forward.