MED 17.4.4 patch . PSA

[motochip]

Can anybody help? I have pcmflash and after loading flash in MED17.4.4, PSA cleans up after few eprom starts. Apparently you can patch file somehow? Thank you very much

[bobolin4o]

Didn't get anything... what is the problem?

[motochip]

I play bench mode. I edit, upload. the car starts several times and then no longer. I compared the eprom tc1793 and it turns out 80 percent cleared :-(

[bobolin4o]

pcmflash don't have support?
And where is your ori file?
Do you have a FULL backup of the ECU? If have, restore the ECU to it.

BTW, i don't like error codes like P06XX...

[motochip]

everything is ok on the original. I have error P0606 and the car is functional.

[bobolin4o]

everything is ok on the original. I have error P0606 and the car is functional.

Post ori, mate...

[motochip]

I tried to remove P107A and P0606

[bobolin4o]

hm... too much changes for only two codes...
PCM flash correct the checksum, or not?
and... leave only zeros, but restore FFFFs and try again!

[motochip]

here is something similar only edc17c60 but it's the same TC1793 https://mhhauto.com/Thread-Edc17c60-problem?highlight=P3028

[bobolin4o]

here is something similar only edc17c60 but it's the same TC1793 https://mhhauto.com/Thread-Edc17c60-problem?highlight=P3028

" The pcmflash developer would sort this for you if you had genuine tool, it was an issue on the earlier version. Since update it's been sorted, the same on ktag clone. But for you maybe checksum problem or scan DTC after no start and dtc-off the file P2452 usually"" - it is from that thread... So??

[motochip]

yes, I know :-) but out of curiosity. On Monday I am going for the autotuner master, but there will always be someone who is not here and I thought something like this :-) Thank you very much for your interest and willingness to help

[motochip]

for the edc17c60 PSA there is a solution and I know it but unfortunately not here