Xhorse ID48 Cloning Wait Time

[keyprogramming]

The wait time seems to be getting greater and greater.
Yesterday (11.00 GMT) I was 71st in queue with an approx wait time of 1 hour 15 mins.
When I got it last Dec, the average wait time was 10-15 mins.
Fortunately I still have my Silca RW4 and M-Box, and a guaranteed 3-4 minutes wait.
I know the Silca T48 chips are 4x more than superchips, but I don't have the time to hang around.
I think Xhorse should be investing in upgrading their servers to cope with the increased demand, or it's only going to get worse.

[godfathertre]

Depends on day and month last one I have done took 4 minutes is it not china still In holiday.

[paul_12345]

Just done one 28 minutes

[qwojtus]

Today I waited 40min and told me calculation error ��
Any quicker machine out there on the market?

[ngomes]

mobile kd is good

[super jumbe]

Most people doing online and will get longer and longer time done, imagin they taking 10 doller every copy that lots of money a day.

[Manta1600]

Most people doing online and will get longer and longer time done, imagin they taking 10 doller every copy that lots of money a day.

Most of the calculation are almost free they don't have full profit from all calculations

I prefer to copy the chip but when I see that calculation need more than 15 minutes I program the chip by OBD

[Matronix]

For this I have 3 main tools (and vvdi and im608 can also do some ones) - Xhorse Mini Key Tool, Key DIY XD-2 and HandyBaby 2, if one says it takes long time, will try another, most of the time it saves at least 15 minutes to half an hour this way. I also hate to wait but will set the copy function to work before starting to cut the key so at least that time is not wasted.