Peugeot 307 car key remote

[neimy]

How to program remote (orginal key) for this car Manual
orginal key
thanks

[comizelu]

Turn ignition on and press and hold one of the buttons on the remote for 10seconds.

Ps..if you Google it next time might get a faster answer

Sent from my MI CC9 Pro Premium Edition using Tapatalk

[neimy]

Turn ignition on and press and hold one of the buttons on the remote for 10seconds.

Ps..if you Google it next time might get a faster answer

Sent from my MI CC9 Pro Premium Edition using Tapatalk
I have tried counted ways but failed

[rapidlocksmiths]

so the next question is , was it a complete new key with paired chip and remote board , or are you trying to use a used remote board and new chip

also is it the correct remote for the vehicle , is it original or aftermarket , is it new or used part

if original key for the car then turn ignition on to position 2 then press and hold lock button for 10 seconds then release button and switch off ignition and test key , if the newer flip key then press lock button for 5 seconds

[neimy]

so the next question is , was it a complete new key with paired chip and remote board , or are you trying to use a used remote board and new chip

also is it the correct remote for the vehicle , is it original or aftermarket , is it new or used part

if original key for the car then turn ignition on to position 2 then press and hold lock button for 10 seconds then release button and switch off ignition and test key , if the newer flip key then press lock button for 5 seconds
I use remote board but original remote
The car has an immo off
I will try this process and tell you

[newone]

if not wrong because of immo off you can not recync remote

[rapidlocksmiths]

iff immo off you cannot code in chip so cannot pair the remote