Opel Insignia AC Delco E98 DPF Problem after removing

[Andi 85]

Hello,

I have an Opel Insignia, year 2015 with an B20DTH (CDTI 170hp) engine. This car has an AC Delco E98 ECU. We removed successfully the DPF (car does not go anymore in the regeneration mode), but we have the problem that many times we see in our dashboard a DPF message (attached picture) and warning sound which is very annoying. Does someone know how to remove this message and sound from dashboard? I attached the original file and our modified file (Stage1, DPF and EGR off). Thanks in advance....

Cheers, Andi

[ecuauto]

Hello
did you make any settings before modifying the program?
dpf
pressure sensor on ori?
you do not have DTC in ecu?
configuration change in clocks only possible online, I doubt that in 20015 it would be possible to disable DPF
do a reset of the settings and if you have ok solutions, the message will disappear

[Omantik]

what message at english? i think i can disable it at cluster configuration. write me message at english and vin code of car

[figani]

Hello,

We removed successfully the DPF (car does not go anymore in the regeneration mode)




in display it make regeneration...
so I think your solution is not ok...

[voltechcar]

automatic software not working, buy good solution.

[Andi 85]

automatic software not working, buy good solution.

Do you have a good solution?

[Andi 85]

Before I wrote the modified file, I reset the hole system and message in dashboard was gone. Unfortunately, after we drove 50km message came back on. We have no DTC.

[Andi 85]

what message at english? i think i can disable it at cluster configuration. write me message at english and vin code of car
Message in english: DPF regeneration in progress, please drive along.

[teerak2uk]

Put original file back in car and do dpf reset then write modded file and try

[Andi 85]

Put original file back in car and do dpf reset then write modded file and try
I tried this already...After 50km message came back...

[teerak2uk]

Put original back in car then dpf reset (new dpf installed) then read again and send that read to tuner.

Why did you do dpf was there faults?

[figani]

it´s also possible without reset before write solution, and or sometimes reset not work...
in any case reset can be done manually in flash...
just find someone who knows what he´s doing...

[Andi 85]

DPF was damged/Full.

Thanks.

[teerak2uk]

DPF was damged/Full.

Thanks.So you didn't remove dpf internals but did dpf delete?

[dtip]

DPF was damged/Full.

Thanks.
You know that you need to remove DPF physicly ?
:party :

[Andi 85]

You know that you need to remove DPF physicly ?
:party :

Yes of course...

[Andi 85]

So you didn't remove dpf internals but did dpf delete?

We removed the dpf of course...

[mihaiti]

Hi, i had the same problem, file was not ok. I have a file working just have to check sw version.

[Andi 85]

Hi, i had the same problem, file was not ok. I have a file working just have to check sw version.

Thank you mate, I have a look and report!

[Andi 85]

Hi, i had the same problem, file was not ok. I have a file working just have to check sw version.

Could you please post your original file too? Thanks

[andreyok]

Hello, friend. Write password for this archive, please

[andreyok]

Hi, i had the same problem, file was not ok. I have a file working just have to check sw version.
Hello, friend. Write password for this archive, please

[Martin81]

Hello, I have the same problem as the first one in the post... I have a solution for DPF EGR and AdBlue off that doesn't work.
After writing the solution, after 50-100 km the message lights up in the speedometer: "DPF is being regenerated, please continue driving".

Can someone help me? I am urgently looking for a solution that works!
I attached Ori and my solution.

King Regards MG

[tsmotor]

Hi, i had the same problem :(

[tutzu]

YOU NEED FULL READ FOR THIS ECU TO MAKE DPF OFF

[jurebv]

no you dont, anything can be done with obd read