Burned ECU curcuit boards, solution?

[Sefior]

Hello.

I have an Opel Vivaro 2.0 CDTi with Bosch EDC16C36 ECU.
The board inside is burned and the car is not working.

I bought a used one exactly same original number and everything.

The thing is, I can not clone the original one because I can not read it, when I try to read it with K-TAG the ECU make some smoke and I get error when reading it.

What is the solution for this?

Thank you.

[figani]

Hello.

I have an Opel Vivaro 2.0 CDTi with Bosch EDC16C36 ECU.
The board inside is burned and the car is not working.

I bought a used one exactly same original number and everything.

The thing is, I can not clone the original one because I can not read it, when I try to read it with K-TAG the ECU make some smoke and I get error when reading it.

What is the solution for this?

Thank you.


If all same, try it by transfer physically ee...

[chrisimerk]

If all the sw and hw numbers match then either desolder eeprom from old ecu to the new ecu or read the eeprom with programmer and write it to the new ecu

Regards

[Sefior]

If all the sw and hw numbers match then either desolder eeprom from old ecu to the new ecu or read the eeprom with programmer and write it to the new ecu Regards https://www.aliexpress.com/item/32725360255.html?spm=a2g0o.productlist.0.0.4486414 9AzVz0D&algo_pvid=8836a7e0-19b3-4744-9090-65ce5d6de241&algo_expid=8836a7e0-19b3-4744-9090-65ce5d6de241-0&btsid=2100bb5116039177610321509e23c4&ws_ab_test=searchweb0_0,searchweb201602_,searchweb 201603_ Can I use this eeprom programmer for it?

[chrisimerk]

https://www.aliexpress.com/item/32725360255.html?spm=a2g0o.productlist.0.0.4486414 9AzVz0D&algo_pvid=8836a7e0-19b3-4744-9090-65ce5d6de241&algo_expid=8836a7e0-19b3-4744-9090-65ce5d6de241-0&btsid=2100bb5116039177610321509e23c4&ws_ab_test=searchweb0_0,searchweb201602_,searchweb 201603_ Can I use this eeprom programmer for it?

yeah that should do just fine

[figani]

https://www.aliexpress.com/item/32725360255.html?spm=a2g0o.productlist.0.0.4486414 9AzVz0D&algo_pvid=8836a7e0-19b3-4744-9090-65ce5d6de241&algo_expid=8836a7e0-19b3-4744-9090-65ce5d6de241-0&btsid=2100bb5116039177610321509e23c4&ws_ab_test=searchweb0_0,searchweb201602_,searchweb 201603_ Can I use this eeprom programmer for it?



for what you need it....?
it´s only good to get maybe corrupt data...
trasfer it physically and you will be almost 100% sure, that you have done a good job...

[JoeBB]

yes just swap eeprom with hot air

[Sefior]

for what you need it....?
it´s only good to get maybe corrupt data...
trasfer it physically and you will be almost 100% sure, that you have done a good job...


yes just swap eeprom with hot air


I have never removed an eeprom and changed, so I dont want to do anything wrong and ~~~~ it up.
Or is it very easy?

[JoeBB]

v easy! google SMD desoldering or soldering. not necessarily has to be hot air. u can remove with solder iron too. these chips can handle very high temps

[chrisimerk]

If you have no experience with chip removal or with a soldering iron then I would not risk doing that I would just read the chip with programmer with a soic 8 clip as it is on board

Done this many times with programmer not the one you looked at but should do same job.

If in doubt post the read eeprom here and I'll look at it to make sure its not corrupt and all there.

Regards

[Sefior]

If you have no experience with chip removal or with a soldering iron then I would not risk doing that I would just read the chip with programmer with a soic 8 clip as it is on board

Done this many times with programmer not the one you looked at but should do same job.

If in doubt post the read eeprom here and I'll look at it to make sure its not corrupt and all there.

Regards

Hello.
I got the programmer now.

How do I know which eeprom to read?

I attached picture..

Do I use the "SOIC8" clip and connect it to the programmer and attach it on the eeprom? And read?

759775

[Sefior]

If you have no experience with chip removal or with a soldering iron then I would not risk doing that I would just read the chip with programmer with a soic 8 clip as it is on board

Done this many times with programmer not the one you looked at but should do same job.

If in doubt post the read eeprom here and I'll look at it to make sure its not corrupt and all there.

Regards

Or is it on this side?
759779

[chrisimerk]

Or is it on this side?
759779

pictures not clear enough to see

[racing7361]

Or is it on this side?
759779dedicate yourself to something else

[Sefior]

pictures not clear enough to see


759873759874

Like this?
These 3 eeproms have 8 legs, all others have more legs.

[chrisimerk]

759873759874

Like this?
These 3 eeproms have 8 legs, all others have more legs.

here highlighted in red

[Sefior]

here highlighted in red

759907

Do you know what to choose here?
24 EEPROM or 25 SPI FLASH, and what eeprom from list do I choose if I choose 24 eeprom?

[Sefior]

here highlighted in red


Hey bro, did you see the picture I attached?

Do you know what to choose on the programmer software?

[chrisimerk]

Hey bro, did you see the picture I attached?

Do you know what to choose on the programmer software?

no i dont as i have never used what your using i have different programmer.
did it read ok is it all FFFFF the read eeprom?

[Sefior]

no i dont as i have never used what your using i have different programmer.
did it read ok is it all FFFFF the read eeprom?

I attached the eeprom file that it read.. I dont know if its right or wrong?

Can you check?

Its only F FFFFFFF everywhere..

[Sefior]

no i dont as i have never used what your using i have different programmer.
did it read ok is it all FFFFF the read eeprom?

I tried to move the clip on the programmer to other place, and read again..
this is another file..

is it ok?

[chrisimerk]

I tried to move the clip on the programmer to other place, and read again..
this is another file..

is it ok?

If its all FFFFF then no it's not ok as that is blank

[Sefior]

If its all FFFFF then no it's not ok as that is blank

The other file has 0000000000 and FFFFF, is it ok?

[chrisimerk]

The other file has 0000000000 and FFFFF, is it ok?

no thats a blank read do you have skype?

[Sefior]

no thats a blank read do you have skype?

Hello.

Yes sir, I added you.

[Sefior]

I bought an used ECU.

I wrote all files by themself, one by one, mpc + fls + eeproom.

The files wrote successfully.

But the car still doesn’t start?

What could be wrong?

Not even cranking engine.

With diagnostic tool, I can not read the engine, it says failed to disconnect.

[Zmann]

From your above two posts with dump attached you went wrong too far, have you corrected it ? The menu on the programmer must be 25320 or 95320 and the saved file must be 4 KB in size, not 512.