Opel Vivaro 1.9dci EDC15C3 pinout

[labors]

Hello, i can't find pinout for EDC15C3 (opel vivaro 1.9dci). I found pinout for old version for this ecu. How to bootmode this?

[labors]

Anyone can help me? Thanks in advance.

[Louislesinge]

Hi,

Grey 32 pin connector A:
A4 CAN L
B4 CAN H
C3 K line

Brown 48 pin connector B:

E3 + ignition
L3, L4 ground
M2, M3 + battery

If remember don't need to do boot mode...

Greetings,

[labors]

Hi,

Grey 32 pin connector A:
A4 CAN L
B4 CAN H
C3 K line

Brown 48 pin connector B:

E3 + ignition
L3, L4 ground
M2, M3 + battery

If remember don't need to do boot mode...

Greetings,

Great, thanks. Mpps or kess?

[Louislesinge]

Re,
Do never use china Kess, much better MPPS.
Greetings,

[Louislesinge]

Re,
At the end of the manual, i see for the K Line F2 on A connector!

[labors]

Re,
At the end of the manual, i see for the K Line F2 on A connector!

MPPS and Kess does not even do an ECU ID. The ECU is OK, it comes from a working car. My friend sent me for remap.

[Louislesinge]

Re,
So try under boot mode, follow MPPS instructions, put pin as show here to ground with 1kOhm resistor:
Greetings,

[chrisimerk]

Hello, i can't find pinout for EDC15C3 (opel vivaro 1.9dci). I found pinout for old version for this ecu. How to bootmode this?

here is pinout and bottom one is different kind of c3 but the location of said boot pin is always in same location pin 24
https://renault-keycard-replacement.co.uk/images/detailed/1/Renault_EDC_15C3.jpg

https://wiki.obdtuning.de/images/e/e6/Renault_EDC15C3_BootPin.jpg

[yancovuski]

THANKS :dad2: