PDA

View Full Version : E60 525D Launch Control QUESTION



PelsonBMW
22nd October, 2020, 04:33 PM
Hey ! i have done an launch control on my 525d but i want to make it like a popcorn cut launch control - now its soft LC with rev hanged at 3.500rpm , what i have to change to make it work like on video ?

https://youtu.be/CVo-ngNieuE?t=13



https://s1.imagebanana.com/file/201022/thb/Kw6UKMHU.png (https://www.imagebanana.com/s/1916/Kw6UKMHU.html)

a500tut
22nd October, 2020, 06:39 PM
Do for 3500 rpm max value and for 3501 rpm min value ;)

PelsonBMW
22nd October, 2020, 07:40 PM
Do for 3500 rpm max value and for 3501 rpm min value ;)


it is done like you said , on photo attached

famozo
22nd October, 2020, 08:03 PM
https://s2.imagebanana.com/file/201022/thb/B6pHGDgp.png (https://www.imagebanana.com/s/1916/B6pHGDgp.html)

try

PelsonBMW
22nd October, 2020, 08:05 PM
https://s2.imagebanana.com/file/201022/thb/B6pHGDgp.png (https://www.imagebanana.com/s/1916/B6pHGDgp.html)

try


swap 3051 with 0000 ? :P

a500tut
22nd October, 2020, 08:52 PM
Lol 3500 3501 4000 4500 5000...

chrisimerk
22nd October, 2020, 09:09 PM
swap 3051 with 0000 ? :P

no just copy what i have done here you want to put 00000 after rpm limit so in this case 3520 sound good at that

https://s1.imagebanana.com/file/201022/gGLapkUY.png

PelsonBMW
22nd October, 2020, 09:34 PM
no just copy what i have done here you want to put 00000 after rpm limit so in this case 3520 sound good at that

https://s1.imagebanana.com/file/201022/gGLapkUY.png


I'll try that tomorrow, thanks :)

PelsonBMW
23rd October, 2020, 11:05 AM
So yeah, I've tried those options you said guys but it's not working

AVDigitale
23rd October, 2020, 11:17 AM
needed much more to do for launch control to be harder

PelsonBMW
23rd October, 2020, 11:22 AM
Yeah i cannot figure that out :/ , here is my file , could anybody take a look and make it work ? im already 2 days off with this and my mind is blown

PelsonBMW
23rd October, 2020, 01:36 PM
Anybody? Guys

chrisimerk
23rd October, 2020, 03:49 PM
Anybody? Guys

for starters you where using the wrong gear limiter here tested solution

pass in pm

PelsonBMW
23rd October, 2020, 05:56 PM
for starters you where using the wrong gear limiter here tested solution

pass in pm

It's not working, you did some similar file for me some time ago and it cranks but not start, you disabled RPMs to 0. So this solution is not working mate, just tested. Car cranks but won't start, well it starts and after 0.1 seconds shuts off

PelsonBMW
23rd October, 2020, 06:05 PM
it wont work mate :P you set motormoment to 0 , thats why car wont start

https://s2.imagebanana.com/file/201023/thb/jcU823Ey.png (https://www.imagebanana.com/s/1917/jcU823Ey.html)

chrisimerk
23rd October, 2020, 06:26 PM
it wont work mate :P you set motormoment to 0 , thats why car wont start

https://s2.imagebanana.com/file/201023/thb/jcU823Ey.png (https://www.imagebanana.com/s/1917/jcU823Ey.html)

this tested solution worked many times mate

PelsonBMW
23rd October, 2020, 06:32 PM
man , ive flashed file you posted here , seriously . The car starts and cuts out, so its not working

chrisimerk
23rd October, 2020, 06:43 PM
man , ive flashed file you posted here , seriously . The car starts and cuts out, so its not working

here same pass its tested loads of times the first file i sent

dont change nothing with file dont try correct it or anything just flash it straight on as it is

PelsonBMW
23rd October, 2020, 06:53 PM
I have changed nothing on your file. It's just not working after flash. Engine starts and shuts off after start. BTW my car is manual GB

chrisimerk
23rd October, 2020, 06:55 PM
yeah will work and i mean dont run it through winols or any other software just flash it straight on

had slimier problem in past was checksum problem winols not good sometimes for checksum with bmw

PelsonBMW
23rd October, 2020, 08:00 PM
I've heard about that, I'll test tomorrow :)

PelsonBMW
24th October, 2020, 08:54 AM
yeah will work and i mean dont run it through winols or any other software just flash it straight on

had slimier problem in past was checksum problem winols not good sometimes for checksum with bmw




Like I said mate, I flashed it straight with Kess. Not working

https://youtu.be/-2Zs5DLQSt8

PelsonBMW
24th October, 2020, 01:11 PM
so any ideas how to sort it out ? :D

PelsonBMW
28th October, 2020, 08:43 PM
anybody ? Serioously ? nobody could help ?!

a500tut
29th October, 2020, 10:13 AM
anybody ? Serioously ? nobody could help ?!

Try this and report.

mrjay88
29th October, 2020, 10:59 AM
Try this buddy launch control at 3500rpm and popcorn at 4800rpm checksum ok ready to write let me know pass in pm

PelsonBMW
29th October, 2020, 11:03 AM
Try this and report.

So, on neutral it's not working. It works while driving xD, while I reach 3500rpm it cuts like crazy, but on neutral it is soft cut

AVDigitale
29th October, 2020, 11:45 AM
we have solution about this

PelsonBMW
29th October, 2020, 12:36 PM
we have solution about this

And? So if you have it maybe you help? I've posted here good stage 1 file for 240/550 NM Dyno tested file that is working since 60kkm with dpf egr speed off and with working LC but soft one. All I want is popping LC, that's it. But first I will test MRJAY file.

PelsonBMW
29th October, 2020, 12:58 PM
Try this buddy launch control at 3500rpm and popcorn at 4800rpm checksum ok ready to write let me know pass in pm


Same thing as Chrisimerk solution, car won't start

a500tut
29th October, 2020, 01:19 PM
So, on neutral it's not working. It works while driving xD, while I reach 3500rpm it cuts like crazy, but on neutral it is soft cut

Try another file :)

AVDigitale
29th October, 2020, 01:23 PM
And? So if you have it maybe you help? I've posted here good stage 1 file for 240/550 NM Dyno tested file that is working since 60kkm with dpf egr speed off and with working LC but soft one. All I want is popping LC, that's it. But first I will test MRJAY file.
i don't share free here solution sorry

mrjay88
29th October, 2020, 01:36 PM
Here try this one harder cut on launch control same password dont forget to thanks and rep

PelsonBMW
29th October, 2020, 01:50 PM
Right guys, thank you for your help, I'll test mrjay file also, the last one. For now , it was solved by guy BADDOG84, he sent me solution how to do it by pm.

Here is video of working solution

https://youtu.be/a2_ljw5PPWo

mrjay88
29th October, 2020, 02:00 PM
Right guys, thank you for your help, I'll test mrjay file also, the last one. For now , it was solved by guy BADDOG84, he sent me solution how to do it by pm.

Here is video of working solution

https://youtu.be/a2_ljw5PPWo

when you test my file please post a video thank you

PelsonBMW
29th October, 2020, 02:04 PM
No problem as soon I will have a second i will try both of your files with videos :) that's no problem :)

mrjay88
29th October, 2020, 02:12 PM
No problem as soon I will have a second i will try both of your files with videos :) that's no problem :)

test the last file i posted as that one has a harder cut and post a video of that one like you said when get a second thanks

PelsonBMW
29th October, 2020, 02:19 PM
test the last file i posted as that one has a harder cut and post a video of that one like you said when get a second thanks


quick look on project and i can tell you with 100000% that car wont start because of this table set to 0 0 0 0 0 0 0 0 at all TQ moment

https://s1.imagebanana.com/file/201029/thb/FsQjaRAX.png (https://www.imagebanana.com/s/1923/FsQjaRAX.html)

PelsonBMW
29th October, 2020, 02:20 PM
but you can make only a PCon 4800 i will test it if you want :)

mrjay88
29th October, 2020, 03:15 PM
but you can make only a PCon 4800 i will test it if you want :)

no its ok buddy have nice day

PelsonBMW
29th October, 2020, 07:02 PM
https://www.youtube.com/watch?v=fI3BlKOW7Zk&feature=youtu.be

a500tut
29th October, 2020, 08:32 PM
You tested my second file? :)

PelsonBMW
29th October, 2020, 09:24 PM
You tested my second file? :)

i doesnt have time today because i had to leave my home to go and buy some food before another LOCKDOWN... lol , i will test it tommorow :D