C3 problem

[Nikola1309]

After somebody try to calibrate km on c3 from 2006 with valeo bsi and jc dash, on dash show only 000000. Can somebody calibrate it ok. Try only dash but again 0. Here are readings from bsi and dash. I need 169766km. Thanks

[Fec001]

Try this reseted BSI dump and your dump to instruments.

[Nikola1309]

I try your file. Still no god. One more thing. I drive car about 10km. Km go up 000010, after turn off, and let car to sleep do again return to 000000.

[Fec001]

Try with my BSI dump and with original IC dump and lets see if all come back to normal(original km).

[Nikola1309]

Problem is that car came to me with this problem. And readingsare made after problem apear. I try your bsi dump with some other dump that i found on dk, but still the same.

[Nikola1309]

Can anyone else looks at dumps please?

[patres]

Hi, I solve same problem on c4 and on my wonder there was eeprom in cluster rotated at 180degrees and soldered. For sure look for it

[Nikola1309]

Thanks for answer, but orientation is good. That is what I first check.

[donkeypower]

Thanks for answer, but orientation is good. That is what I first check.

Hi i had same problem with a c3 one problem that is important is that you keep a good voltage to the battery while reading or writing to the bsi as these cars are very fast at draining the battery because when you read bsi a lot of functions activate including stupid things like windscreen wipers that you cant turn off ! secondly as Patres said make sure the Eeprom chip is the correct way down and also make sure each leg is making a good contact with the pads do not use to much solder as again these cars dont like it, hope that helps report back.