Cas 3 Flash pls

[honingkoning]

could someone share the right flash for this cas3_plus

i recieved this cas in this way and this happend after a flat battery.

61.35-9226238-01
2000502402

i am not sure what numbers should match.

i read this with smok jtag.

eep looks good to me but maybe someone could double check it.

when i read this with red cas tool it done show me FSV/OSV en sw numbers

thanks
https://uploads.tapatalk-cdn.com/20201029/4027b7c7b313be6e5dad533ff4c696b8.jpghttps://uploads.tapatalk-cdn.com/20201029/41680b748529704d2f698bf2ccccaa46.jpg

[brend]

Here good one 61.35-9226238-01 flash........

[tech_cz]

Here good one 61.35-9226238-01 flash........

It is wrong.
He needs this one:

WBR, Marek

[brend]

Don't lead people astray.
Check better.......756896
Rar fixed......without pass.


It is wrong.
He needs this one:

WBR, Marek

[tech_cz]

Brend
your flash is also OK, because it is 9389115.
I could not check passworded file. You have just mistake in file title.

WBR, Marek

[brend]

File name fixed from cas sticker
And Im not see in first post1 samething like this......9389115.
Why you think,like only you is right?

For me enough cas nr. And if look at this thread my flash by cas sticker is right!!!

[tech_cz]

Brend,
you only choose that file by chance.
You have to check No. in eeprom and flash. All BMW Cas are updated so No. from sticker almost never correspond with file inside.

WBR, Marek

[brend]

How many people as there are opinions.




Brend,
you only choose that file by chance.
You have to check No. in eeprom and flash. All BMW Cas are updated so No. from sticker almost never correspond with file inside.

WBR, Marek

About this.......Bull_shut!

If cas totaly death,how must find this?


And last.......
If hardware original from car enough sticker........updated or not ,It doesn't matter,eep work with high wimware and low without problem.......It's can by different only if car totaly modified like engine,tcm,esp.
For enstein car_____sw nr away need only_____ if hardware install from another car which have different configuration also flash to is another.

[honingkoning]

OK guys the car did not start with Brends flash, so I took vvdi2 and preformed the cas 3 repair function.
Car came alive again only elv not working, so a non starter.
I am not sure if it's caused by the elv it self or the cas.

Today I will try fit an emu and see what happens.

I keep you up to date.,btw elv cas synch did not help.

Wbr Adam.

[brend]

Flash ok 100%.

This is the problem, so you don't do anything doesn't help.
Because......
If you look at your flash from the first post,I can say with confidence that the flash is not erased so much (50%) after the battery.
You have a damaged cas on your desk and the people who brought it to you just withheld all the information about how it happened.






OK guys the car did not start with Brends flash, so I took vvdi2 and preformed the cas 3 repair function.
Car came alive again only elv not working, so a non starter.
I am not sure if it's caused by the elv it self or the cas.

Today I will try fit an emu and see what happens.

I keep you up to date.,btw elv cas synch did not help.

Wbr Adam.

[honingkoning]

Flash ok 100%.

This is the problem, so you don't do anything doesn't help.
Because......
If you look at your flash from the first post,I can say with confidence that the flash is not erased so much (50%) after the battery.
You have a damaged cas on your desk and the people who brought it to you just withheld all the information about how it happened.Thanks mate, I tried the emu and that does not work, is this controlled by the flash or eep (the elv I mean).

Maybe someone can check my eep file to see if that's correct.

Wbr Adam.