failed to sync. peugeot 406 remote key

[fady eid]

have peugeot 406 2004 i have done bsi replacing with new ecu car starts great porgram keys ok but cant sync the remote control tried more than 7 types of remote with 433mhz for psa cars key programned but no remote
tips:
i changed the com2000 as i think its the receiver no luck
tried to sync by ign on with press key 10seconds no luck
centerl locking works fine with key from door outside and inside
need help which remote will work and how to sync

[morgano]

Did you change transponder in key?

[fady eid]

yes changed transponder but its id46 chip external chip not built in remote

[drrimz]

yes changed transponder but its id46 chip external chip not built in remote

Remote control data is also recorded in 7936. Add a remote control from xhorse or keydiy

[fady eid]

tried many types by xhorse and keydiy still not okay key programed but no remote sync

[Zmann]

You need an original remote part no. 6554.RA or equivalent. The remote must transmit network code of 04DA if you have a tool to read.

[fady eid]

could u help me with a link to buy this remote as tried many clones not ok

[g5n14]

could u help me with a link to buy this remote as tried many clones not ok
Recently done one. Wireles super remote didnt work. But the one which is semi-super remote worked. Like i dont remember which xhorse series it is, will check tomorrow. But the one which can emulate just a few types of immo chips like 7-10 (7935, 7936 and other), i belive it was a first xhorse attempt to universal remote. I just programmed it via diagnostics, then was pressing all buttons like a mad man, switching ign on off and after 1-2 min BAM and remote started working. Make sure you generate it with VVDI, not a key tool and make sure it tells you to use remote with NXP chip, then you can be sure its a right type.

[rdu04]

you need
Car Remote Key 433MHz ID46 Chip PCF7941

[kiszka]

Car Remote Key 433MHz
PEUGEOT 406 2002 Transponder PHILIPS Crypto2 ID46 JMA TP12,TPX4 PCF7941 or key PCF7936
PEUGEOT 407 2004 Transponder PHILIPS Crypto2 ID46 JMA TP12 TPX4 PCF7941 or key PCF7936

[fady eid]

please give me a specific type with the vvdi u done thank u

someone told me all remote done by keydiy or xhorse will not work only need to buy brand new genuine remote is that right ?

please anyone who tell me the type tell me by which tool he done remote thank u so much

[Zmann]

For people who don't know why on these type of PSA remotes and the remote part not working, good answers can be found here (https://www.digital-kaos.co.uk/forums/showthread.php/325914-Reusing-old-Peugeot-Citroen-remotes-type-73373067B-C?highlight=Reusing+Peugeot%2FCitroen+remotes+type ) in this thread.

Just giving comment and advise by the type of transponder alone may be considered as nonsense !

[kiszka]

For people who don't know why on these type of PSA remotes and the remote part not working, good answers can be found here (https://www.digital-kaos.co.uk/forums/showthread.php/325914-Reusing-old-Peugeot-Citroen-remotes-type-73373067B-C?highlight=Reusing+Peugeot%2FCitroen+remotes+type ) in this thread.

Just giving comment and advise by the type of transponder alone may be considered as nonsense !

this is some explanation but does not apply to this key

this is for peugeot 307

[fady eid]

kiszka really thank u i understand now the problem so u mean the trasnponder and remote are paired together ( the data is stored in bsi like vin & pin )

so to reprogram used remote we need the data in bsi , in my case i tried to reprogram remote id46 7936 433mhz ask with keydiy and xtool , also in every time i i add keys in bsi then try to sync the remote , when i go to bsi -com2000 parameters i see when i press the remote values changes to active but still not working , many guys confirm to me the only remote will be able to reprogramed is original which costs many $$ so i need to ask as some posts here say they done by vvdi again thank u

[Zmann]

this is some explanation but does not apply to this key

this is for peugeot 307

hm interesting !