BMW & BENZ KM CHANGE

[hamedladan]

Hi All
i am new on this forum
i want buy a strong programmer that can be bypass secured mcu like HC12, 9S12,.... like xprog-m programmer the orginal of this programer is very high price.
anybody know this company:
Programmers XPROG-M Programmer (http://www.tek-tronics.co.uk/product_info.php?products_id=115)
they offer FULL xprog-m with 550 Euro i dont know can trust it for bypass 9s12 ,HC12 family secured option???
if you know this programer or other good clone xprog-m or other good solution send please.
you think why most cloned xprog-m cant bypass HC12 ,9s12 mcu security option??
where is problem, adapter or soft or main programer board??
can use orginal adapter whit cloned xprog-m or cloned Full software with orginal xprog-m programer (TMT)????
EXCAUSE me for my poor english!!!!
best regards

[drpeter]

Hi All
i am new on this forum
i want buy a strong programmer that can be bypass secured mcu like HC12, 9S12,.... like xprog-m programmer the orginal of this programer is very high price.
anybody know this company:
Programmers XPROG-M Programmer (http://www.tek-tronics.co.uk/product_info.php?products_id=115)
they offer FULL xprog-m with 550 Euro i dont know can trust it for bypass 9s12 ,HC12 family secured option???
if you know this programer or other good clone xprog-m or other good solution send please.
you think why most cloned xprog-m cant bypass HC12 ,9s12 mcu security option??
where is problem, adapter or soft or main programer board??
can use orginal adapter whit cloned xprog-m or cloned Full software with orginal xprog-m programer (TMT)????
EXCAUSE me for my poor english!!!!
best regards

This one is 100% okay,

China ECU Tools Centre (http://www.ecutool.com/productshow.asp?id=1629&sortsid=3503&sorts)=

[Ding-Dong]

hi
For 912/9s12 secured mcus i am usig the CAS3 Programmer from Smelecom.com & I'm satisfied with that but u can also try on bynkaay & fjetech also

With Regards

[hamedladan]

Hi dear friend
you sure about china ECU center???? you test this programer??

[melcool]

Hi dear friend
you sure about china ECU center???? you test this programer??


If I were you I would buy this:

China ECU Tools Centre (http://www.ecutool.com/productshow.asp?id=1824&sortsid=3503&sorts=)

it replace anything that read 912 family secured or not (ETL, UPA, Xprog etc.) and most important in circuit.
Think!

[drpeter]

Hi dear friend
you sure about china ECU center???? you test this programer??


Yes I did many cars with this tool always worked.

[profi-tuning]

yes it works fine but beware the also sell this same programmer without 12V connector , so then he will get only 5 V from usb , then you can get problems with programming !


greets

[dbilik]

Hey friends!
I will buy an 912x programmer.
I have found some on ecutool but i dont know which one works better..
Can someone say me his experience with this tools:
1.) 912/9S12/9S12X Programmer V1.54 goldbox
2.) Cas3 blueBox
3.) Cas3 redbox(expensiver why??)
4.)xprog-m 4.5
thx

[drpeter]

yes it works fine but beware the also sell this same programmer without 12V connector , so then he will get only 5 V from usb , then you can get problems with programming !


greets

That's why I sent him the direct link to the right product

[drpeter]

Hey friends!
I will buy an 912x programmer.
I have found some on ecutool but i dont know which one works better..
Can someone say me his experience with this tools:
1.) 912/9S12/9S12X Programmer V1.54 goldbox
2.) Cas3 blueBox
3.) Cas3 redbox(expensiver why??)
4.)xprog-m 4.5
thx

Red one is more expensive because it works 100%, so buy this one, the gold box seems to work but the software is unstable.

Xprog don't know, blue one lots of problems with power.

[dbilik]

thank you for the fast answer.
can the red one do so much like the gold one, i ask because the list of cars is much more by gold than by red.
which problem i can have with the gold one software?
the price difference between red and gold(cheapper) is 150 dollar.

And my next question when i buy one of this two, i need an universal programmer like Upa Usb(orginal) or xprog-m(clone)
what is better choice?
Thx for helps.
This board is very good!!!

[melcool]

thank you for the fast answer.
can the red one do so much like the gold one, i ask because the list of cars is much more by gold than by red.
which problem i can have with the gold one software?
the price difference between red and gold(cheapper) is 150 dollar.

And my next question when i buy one of this two, i need an universal programmer like Upa Usb(orginal) or xprog-m(clone)
what is better choice?
Thx for helps.
This board is very good!!!

Upa Usb original or clone! both working good but original have updates in the future!
Upa Usb original is 250 but only the programmer ( no adapters)
Upa Usb clone is 250 USB full (programmer + all adapters)

[gizmo666]

this is just right what i was looking too but i am also wondering if "red-box" is doing same cars like "gold box"?