STAGE1 request to map check

[Marco141]

Hello,
If there is anyone able, I would ask you to check the STAGE1 map for my car and write it if there is something wrong with it. Is the map supercharged too much? Will it damage my engine?

In the attachment I am sending the original and modified file


Thank you in advance: D

[Trice1001]

witch car?

[Marco141]

Audi a3 8p 2.0TDI BKD 140KM
Entire stock engine

[Trice1001]

to much torq at lower RPM turbo boost ok, for stage 1 not necessary to chanche NM Con maps, think agr off ist wrong at hystery maps.
But you can try it when change Tq at lower RPM

BR
necessary

[Marco141]

So the map is not bad? Will it damage my engine? I can't improve what you are writing about because I received the map from a friend and my knowledge will only worsen. After uploading it, there may be some side effect? How is labda? Limiters are ok?

[Trice1001]

with this tq you damage your flywheel and gearbox. at longer time
the car will/can make at lower RPM shake the car brbrbrbr vibration. :)
Sorry for my not perfekt englisch :D

At the first/fast look, looks ok but its go better... lambda think while touch TQ-NM maps a little bit to fett. but not so a big problem by BKD.
change tq map and try and drive.

[Marco141]

And the turbo map is ok for sure? In normal maps I have seen increments of up to 200 from the original value and here it is even over 800 at some points. Isn't that too much for a serial engine?

[Marco141]

And does this map look like someone who knows it, or is it just a normal% map without any calculations etc?

[Trice1001]

Turbo map is ok!

Think %


The problem is not how it was done but what, in my opinion.I still think everyone can do what they want, the main thing is that they know what they are doing and not only change values ​​half blind.But it doesn't look like a professional. but ok the car will not break right away i would change a few small things myself then it is at least 100% suitable for the long term.

//edit
stop mom i look again sorry bro

[Marco141]

Are you able to improve this map for me to make it ok? Of course not for free

[Trice1001]

So i have look again turbo map ok 1.35 to 1.6bar at max .
They have tune the Tq-conversion maps mean its 75 mg they enoutg for 200ps ^^ and many tourqe hard remap but not professionel but for fun ok.
That is what i say lower tq at lower RPM and you can try it.

PM

[chrisimerk]

Are you able to improve this map for me to make it ok? Of course not for free

here tested stage 1 made 188bhp and 413nm on dyno this is regarded as a safe tune

enjoy
pass in pm