Volvo V60 2019

[Ginocar]

Hi,

Can you help me to erase the crash from this airbag ecu?
Volvo V60
P31476261
Bosch 0281013052
MCU R7F701330

I tried the CarProTool solution but not didn't work for me.

Thank you
BR

[dragon100]

Here, check and report ...

[Ginocar]

Here, check and report ...

Thank you so much
I will try it at tomorrow

[Ginocar]

Unfortunately it is not good

Crash event storage full and locked

[viteck]

try this file, pass pm.

[Ginocar]

try this file, pass pm.

Thank you so much.
I will try it at tomorrow

[Ginocar]

try this file, pass pm.Hi,

All dtcs can be erase except for this:

SRS-2300 51
Central configuration.
System programming failure.
Not programmed.

Do you have any idea?

[viteck]

you have to do configuration by diagnostic scanner

[Ginocar]

you have to do configuration by diagnostic scannerHow can I configuration?
I only have a Launch X431
Do you mean IMU configuration in airbag ecu,

[viteck]

in the Volvo service you will do it for sure i
n Poland it costs about PLN 200

[Ginocar]

in the Volvo service you will do it for sure i
n Poland it costs about PLN 200in the Volvo service you will do it for sure in Poland it costs about PLN 200I understand.
Thank you for your job

[dragon100]

If you want check other variant ...

[Ginocar]

If you want check other variant ...Ok. Thank you
I will try it tomorrow

[bonux]

i had same module some time ago, tried many different solutions but i always got central config fault. job was finished at dealer