525d E61 popping hardcut

[PelsonBMW]

Hey ! im still messing with my 525d :D , pops on LC achieved , now im trying to make a Pops HC but i cannot make it , any help will be great .
im looking for something like on this video https://www.youtube.com/watch?v=cCKAyTe3cTo


regards

[mrjay88]

Here you go have fun remember to thanks and rep pass in pm

[PelsonBMW]

isnt that a SOFT one HC ? because only difference i see is here https://s1.imagebanana.com/file/201111/thb/edCYvu7G.png (https://www.imagebanana.com/s/1936/edCYvu7G.html)

i know that adress to change limiter but im looking for hard one , but let me test your file :P

[PelsonBMW]

Well it's not aggressive hard cut, it's just cuts on 4500 and i need to modify the LC because it limits the RPMs on idle even without clutch . But while driving its only cuts on 4500

[mrjay88]

that is svrl hardcut change it from 4500 to a higher rpm if your not happy where its set to also if you have the stock exhaust it will sound crap wont make much noise

[PelsonBMW]

i have straight pipe :P , it wont sound good while driving , on stationary i cannot test because i have an LC made on clutch pressed and not pressed , ill try to reverse LC to only while pressed clutch pedal and i will test that HC , now its sound like this on LC https://www.youtube.com/watch?v=fI3BlKOW7Zk


and i know adress for SVRL but it wont affect an agressiveness of high cut

[mrjay88]

i dont understand what your trying to achieve where is your launch control set to at what rpm

[PelsonBMW]

Aggressive hardcut on idle. Aggressive launch control is on 3500rpm.

[chrisimerk]

Aggressive hardcut on idle. Aggressive launch control is on 3500rpm.

The launch control solution you are using is via first gear limiter which is set at 3500 and mg zeroed out to 3500 revolutions you cant have 4500 popcorn and 3500 launch at the same time on first gear not possible and the solution for launch to be activated only while clutch is pressed is a whole different solution to what you are using.

Your basically stuck at 3500 idle and 4500 in the rest of the other gears using SVRL and first gear launch method.

While your driving does it bounce at 4500 or does it just stop there and do nothing?

regards

[PelsonBMW]

The launch control solution you are using is via first gear limiter which is set at 3500 and mg zeroed out to 3500 revolutions you cant have 4500 popcorn and 3500 launch at the same time on first gear not possible and the solution for launch to be activated only while clutch is pressed is a whole different solution to what you are using.

Your basically stuck at 3500 idle and 4500 in the rest of the other gears using SVRL and first gear launch method.

While your driving does it bounce at 4500 or does it just stop there and do nothing?

regards


It's exactly as you said. Yes I know it can be done the other way but while it's done like that, car won't start. It's bouncing just a little bit. It's not prrrrt sound, sounds like m52 stock cut

[racing7361]

pay or learning this is solution

[mrjay88]

post a video of your car while driving with the svrl set to 4500 because i find it hard to believe it sounds like stock bmw if it sounds stock it will just sit at 4500 and not bounce at all all the bmw's ive done in the past done not have this problem

[PelsonBMW]

post a video of your car while driving with the svrl set to 4500 because i find it hard to believe it sounds like stock bmw if it sounds stock it will just sit at 4500 and not bounce at all all the bmw's ive done in the past done not have this problem



https://www.youtube.com/watch?v=fI3BlKOW7Zk THIS IS MY CAR - MY LC
its not bouncing on 4500 , it sounds like stock M52 gasoline engine RPM CUT - WHILE DRIVING , on idle i cant check because its limited to LC :P

[PelsonBMW]

pay or learning this is solution
where is your problem ? what problem do you have ? do you contribute something to the topic ? no .

im LEARNING ALL DAY and im playing with my car this is my hobby to play with it .

[chrisimerk]

https://www.youtube.com/watch?v=fI3BlKOW7Zk THIS IS MY CAR - MY LC
its not bouncing on 4500 , it sounds like stock M52 gasoline engine RPM CUT - WHILE DRIVING , on idle i cant check because its limited to LC :P

here write this i have used torque limiter for hc there is no launch on this file so you can test while car stationary
pass in pm

[rfernandes]

here mate...have a try on this...lc 3500 and hc on 4500
pm for pass

be safe

[PelsonBMW]

Thanks guys, I'll test it today :)