View Full Version : MB W213 2017 SCN CODING OFFLINE
spiridonas
21st November, 2020, 02:04 PM
Hi guys i replaced the esp module in mb w213 with a used one.
I tried to make scn coding in official mb dealer but says error :
"The vin from esp is different from the vehicle vin" and can't start the scn coding.
Please i have sd connect c4 and xentry 2020 software how can coding this module ?
(special function or other trick with other tool)
Many thanks in advance
mercis
21st November, 2020, 04:54 PM
w213 only with vediamo monaco or avdi....or scn online mb dealer
DB_member
21st November, 2020, 05:21 PM
I understand spiridonas tried SCN on-line but wouldn't the second hand control unit need to be made virgin first before on-line SCN works?
daxxer
21st November, 2020, 06:58 PM
first need to change VIN to match with car, SCN online only after :listen:
spiridonas
21st November, 2020, 07:38 PM
I understand spiridonas tried SCN on-line but wouldn't the second hand control unit need to be made virgin first before on-line SCN works?
Many thanks for you time. Yes maybe need to be made virgin first but how i can to make virgin ?
Thanks again
spiridonas
21st November, 2020, 07:40 PM
first need to change VIN to match with car, SCN online only after :listen:
Yes maybe to change VIN first but how i can to change VIN ?
Thanks
subars
25th November, 2020, 05:10 AM
You can make change the vin by non-dealer stardiagnosis, like SDC4 or C5
daxxer
25th November, 2020, 07:19 AM
Yes maybe to change VIN first but how i can to change VIN ?
Thanks
forward this job to someone who are able to do that, without any childreen asking how to do, how to do, how to do..... :stupid:
you save lot of your time and money ;)
ASCM
31st December, 2020, 08:40 PM
How can be changed vin
Sent from my 5033F using Tapatalk
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.