Fitting a mk2.5 cluster on a mk2 FOCUS

[12manux]

Hi guys ,2005 Focus 2 faulty cluster ,the customer doesn t want it repaired but swapped with RED/WHITE mk2.5 cluster.


The car has 2 keys .


I know that i need to reset keys from the new cluster and then program 2 keys to it and the perform module initialisation (this is mmy first cluster swap)


My questions are : -Can i use car's 4D63 original transponders or i need new chips?
-Can this procedure be done with IDS or Forscan ? I have both
-Can the mileage be corected with either one of the tools above?

[rdu04]

you need initialization with ids,reprogram 2 keys,no need new transponder,and car start
for mileage corected post dump motorola here
it's not possible with ids

[12manux]

i shoud go to PATS initialisation and select Instrument cluster replacement ?

[rdu04]

yes/////////////////

[12manux]

ok,i will try and test,thanks for infos

[12manux]

Solved,in case of anyone is looking for this retrofit


Putted in new cluster ,erased keys with ids ,went to key program .................failed (car original 4d63 and a new virgin 4d63) .


Plugged in Forscan ,went to Key programming ,succesful ,2 keys added (car original and a new 4d63)


Then with Forscan went to Module Initialisation ,requiered a DUAL TYPE OUTCODE ,and programming succesful .



then with ELM CONFIG adapted options (BC/CRUISE CONTROL )