help dash tiguan vdo 5NO920883G

[catalinosonesti]

HI
need help to change 206.000 km to 181.000km
big thank for help

[exe123]

It's a MFA premium dash with 24C64. Impossible to make it via eeprom. OBD only!

[catalinosonesti]

Hi .
I use carprog , vw tiguan 0 6 /2014 < ,i read eeprom via obd ,save ,and when I try to change I get error în dash .
I asa suport by codecard.lt ,and tell me to read immo first then km change.
I do not try yet .
Thanks for answer and suport .
By the way car is vw tiguan 2015 / 08 .
Regrads

[H2Deetoo]

Hi, first write service eeprom to your cluster (12A0-14FF all with FF's).
When cluster powers up it should show ERROR on LCD, this is normal.
If your tool still cannot access it, then this version is not supported by your tool.


Rgs H2Deetoo

[catalinosonesti]

Hi, first write service eeprom to your cluster (12A0-14FF all with FF's).
When cluster powers up it should show ERROR on LCD, this is normal.
If your tool still cannot access it, then this version is not supported by your tool.


Rgs H2Deetoo
HI...
i recived by carprog suport a unlock dump ,you have right they modify only 2 bits by ( 12A0 ).my toll can do this dash ,but after i read eeprom i swich to standard function , and show me 0 km in my laptop .that scherry me and i give change km again , start bootloader ,and stop ,show in dash ERROR. maybe when i finish to read orig eeprom then i must to write new km .
What do you think .