Opel corsa 1.7cdti denso big problem dpf

[seba_m_]

Hi all, I have a problem with the dpf in the opel corsa 1.7cdti 125hp denso. The driver is constantly counting the saturation of the dpf filter, as it is 100%, I have limp mode on the board, no errors, safe mode. There is no white smoke, I will do a dpf reset and the car goes normally to the saturation value of 100%. The swiftek file does not work, the support file also does not work, I also did the original ecudecoder and the same problem. Before write, I'm doing a DPF reset. Attachments, original, swiftek and ecudecoder solution. Please help.

[AVDigitale]

not work automatic softwares only manual solution
we have solution

[Meat-Head]

not work automatic softwares only manual solution
we have solution

Well spill the beans, no password either all for free

[AVDigitale]

Well spill the beans, no password either all for free
i help when someone ask me no worry but something what is not easy i don't share free to no one
because here everyday come users and ask for 5 cars and more and making money
be more activity and see what happens here i know all like free but when is for money to make is not good that

[seba_m_]

Friends, I solve most problems with electronics myself, as a last resort I ask on the forum where I helped for free many times and I also expect someone to help and have a solution for the old car.

[seba_m_]

Can anyone help?

[johak]

here............

[seba_m_]

It does not work well, it still counts saturation, the route is 6 km and already 2%, I go 20 km and the load is 9% and it grows. Before uploading the file, I did a full reset of dpf settings.:dead::giveup:

[seba_m_]

No one solution?

[Babos]

If i good remember need recode dashboard to without DPF.

[momogsm]

Hi

Here You Are:

Reset DPF With Original File And Set In Dashboard With Opcom As No DPF, Then Write Mod File,

Pass In Pm

Report Back

Thanks

[seba_m_]

momogsm (https://www.digital-kaos.co.uk/forums/member.php/90219-momogsm) bad file, from another car

[seba_m_]

momogsm (https://www.digital-kaos.co.uk/forums/member.php/90219-momogsm) Your solution is for AP42NCLAP20J driver and my ecu is AP44NCLSP60R. I compared your solution to the original file and it's a 1: 1 swiftek solution and it doesn't work.

OPCOM does not have a programming function without DPF in this dashboard. After logging in the pin code, the only function is the km correction. Dash does not have a DPF lamp, 100% filling turns the lamp on a spiral (check) and the car loses power a little.

[Gita]

TRY THIS
pass pm

[seba_m_]

Gita (https://www.digital-kaos.co.uk/forums/member.php/73637-Gita) doesn't work, still counts saturation ... after 8km

764153

.... and after another 8km ...

764154

and error P2452

764155

any ideas???

[Gita]

Gita (https://www.digital-kaos.co.uk/forums/member.php/73637-Gita) doesn't work, still counts saturation ... after 8km

764153

.... and after another 8km ...

764154

and error P2452

764155

any ideas???

try this
same pass

[seba_m_]

Still does not work, counts the saturation ...:dead: