ECU CLONE AUDI TT 8J 3.2

[wersu]

Hello,

what is the best way to clone my ECU... read flash ,eeprom ?

it is a 022906032LA HW:022906032GP ECU ME 7.1.1.

the second ECU is the same, i want this for testing tuning files...

i have kess, ktag ,mpps ,vagdash can , svci2018 clones...

have to read fullflash or read flash and eeprom and copy to the second ECU ?

thanks for helping

[player]

If its same part number just eeprom.


Sent from my iPhone using Tapatalk

[kiszka]

Hello,

what is the best way to clone my ECU... read flash ,eeprom ?

it is a 022906032LA HW:022906032GP ECU ME 7.1.1.

the second ECU is the same, i want this for testing tuning files...

i have kess, ktag ,mpps ,vagdash can , svci2018 clones...

have to read fullflash or read flash and eeprom and copy to the second ECU ?

thanks for helping
just transfer the immo data

If its same part number just eeprom.


Sent from my iPhone using Tapatalk
would have to have the same production date
then it would be the same, this ecu is after lifts

[player]

Yes. If its same software version and rev, only eep is needed. If he reads full he will see st10 and fls is the same in both


Sent from my iPhone using Tapatalk

[wersu]

so i read the eeprom from original and write it to the second one ?

and if there different i need flash too ?

my original is 022 906 032 HE HW: 022 906 032 GP 0261 201 227 (updated to 022906032LA)

and the second ECU is 022 906 032 LA HW : 022 906 032 GP 0261 0201 868

[player]

Just do full st10,eep and fls and you are 100%...


Sent from my iPhone using Tapatalk

[wersu]

how is the way to do this ?

read all three separately or is it possible with full flash ?

is it important to open the original ECU or read it over obd ?
is there a problem to read only the original ecu with for example kess over obd...or will the ecu be locked...

can you tell me the way to clone the ECU with tools i need ?

somebody do this with clones

[player]

Depends on tool. I read on bench full proc flash and eep with flex without opening any ecu.
Full means processor, flash and eeprom in this me7.1.1 ecu as its st10 based

Over obd no change for kess.


Sent from my iPhone using Tapatalk

[wersu]

what you mean with flex ? which tools you take for this on bench ?

[dtip]

what you mean with flex ? which tools you take for this on bench ?

as he said and you repeated.... flex

[player]

Yes bud. Flex . Your best shot would be open ecu and do with ktag in bootmode.


Sent from my iPhone using Tapatalk

[wersu]

and with ktag bootmode i can read the full proc flash eeprom ? and write it back to second ECU ?

so i have to open the original ECU , correct ?

[player]

Yes. You can do with ktag too. You have ori?


Sent from my iPhone using Tapatalk

[wersu]

no i have kess, ktag ,mpps ,vagdash can , svci2018 clones.

[kiszka]

no i have kess, ktag ,mpps ,vagdash can , svci2018 clones.

it will be faster to turn off immo in eeprom for the tests themselves

[player]

it will be faster to turn off immo in eeprom for the tests themselves

Yes. You are right bud


Sent from my iPhone using Tapatalk

[wersu]

is it possible to read out the pincode from the foreign ecu on bench ?

so i can change the ecu by vcds

[player]

Yes, read eeprom and post here i give you pin


Sent from my iPhone using Tapatalk

[wersu]

ok if i have the eeprom file , i will give you the file...

i wait for the second ECU ...it is on the way to me...

thanks all for the interesting informations and answers of my many questions...