qubits
26th November, 2020, 07:06 AM
Hi Friends,
A customer dropped off this 2007 ML350 with the airbag light on. The here are the codes:
9190 No CAN Message Was Received From Control Unit
N93(Central Gateway Control Unit).
9191 No CAN Message Was Received From Control Unit
N93(Central Gateway Control Unit).
918E No CAN Message Was Received From Control Unit
N93(Central Gateway Control Unit).
918F No CAN Message Was Received From Control Unit
N93(Central Gateway Control Unit).
But in Fault memory (Xentry):
9190 CAN-info/Signal “Occupant detection passenger fa…
9191 CAN-info/Signal “OCM identification” nicht empfar
918e CAN-info/Signal “Occupant classification passenger…
918f CAN-info/Signal “Occupant classification passenger…
I can't seem to find the description of these code in the manual. Xentry checked the CAN configuration and said it was good.
And WSW is not listed in Xentry.
Bosch
0 285 001 993
A1648207926
Problem is under the passenger seat?
A customer dropped off this 2007 ML350 with the airbag light on. The here are the codes:
9190 No CAN Message Was Received From Control Unit
N93(Central Gateway Control Unit).
9191 No CAN Message Was Received From Control Unit
N93(Central Gateway Control Unit).
918E No CAN Message Was Received From Control Unit
N93(Central Gateway Control Unit).
918F No CAN Message Was Received From Control Unit
N93(Central Gateway Control Unit).
But in Fault memory (Xentry):
9190 CAN-info/Signal “Occupant detection passenger fa…
9191 CAN-info/Signal “OCM identification” nicht empfar
918e CAN-info/Signal “Occupant classification passenger…
918f CAN-info/Signal “Occupant classification passenger…
I can't seem to find the description of these code in the manual. Xentry checked the CAN configuration and said it was good.
And WSW is not listed in Xentry.
Bosch
0 285 001 993
A1648207926
Problem is under the passenger seat?