Passat b6 immo

[aaron2020]

Hi all I have a passat b6 ppd1.5 siemens ecu I'm trying to get the immo code and skc who do I get it and what do I need thanks. I don't want to remove and solder onto ecu or dash ect preferably via obd thanks
I have kess v2 master
Vagcom kll blue cable
Vcds HEX-V2 cable plus software

[brend]

For get security bloks need read eeprom dump.
With this tool like ......I have kess v2 master/Vagcom kll blue cable/Vcds HEX-V2........ you can't to do this.

For you chose .........
1.Another good programmer tool for obd2 work
2.Open , desolder, read and last load or decode CS/MAC/PIN.
3.Forget chose 1/2, drive to diller and that's it.


Hi all I have a passat b6 ppd1.5 siemens ecu I'm trying to get the immo code and skc who do I get it and what do I need thanks. I don't want to remove and solder onto ecu or dash ect preferably via obd thanks
I have kess v2 master
Vagcom kll blue cable
Vcds HEX-V2 cable plus software

[aaron2020]

Could you recommend a software and hardware to do this via obd I don't trust myself soldering lol

[aaron2020]

Anybody have any idea please help

[rafal]

also you can post 95320 from CCM........................

[aaron2020]

What tools do I need to get the file

[Agilechaveiros]

upa, xprog, vvdi, beeprog, minipro, etc....

[Weasel3]

Orange5 original

[aaron2020]

Is the any tools that do it via obd port

[aaron2020]

hi ive managed to read my 95320 from ccm lets hope this is ok i did multipul reads and all the same data came the same.
could someone get me the 7 digit skc code and 5 digit pin please. thanks.

[MarekP]

hi ive managed to read my 95320 from ccm lets hope this is ok i did multipul reads and all the same data came the same.
could someone get me the 7 digit skc code and 5 digit pin please. thanks.

Pin:00299
CS:8F70CD1B1EE19A

[rafal]

full info if need:


VIN:
WVWZZZ3CZ7P018796


Immo ID:
VWZCZ000000000


CS:
8F70CD1B1EE19A


MAC:
F96DEB52


PIN:
00299


Power Class:
FE


ELV:
83F6


CCM Status:
6


Key Count:
2


Key1:
CD0A44A7


Key2:
CD0A9457






Hardware version:
HLOW4220060600042000P0032305


VAG Part Number:
3C0959433R


Software version:
0472

[aaron2020]

Thanks I've tried the code in vcds but it says invalid code please help

[rafal]

Thanks I've tried the code in vcds but it says invalid code please help

1st - learn how to press THANKS
2nd - have a look for lock time by obd tool

[aaron2020]

Hi sorry I'm new to the site I did say thanks in previous post. And what do you mean check lock time it's the first time I've entered a code thanks

[rafal]

turn ignition ON - in (08) mvb - (3-1) Lock time immobiliser
edited:
tell us what are you want to do?

[aaron2020]

So I have to wait how ever many seconds it says in the box before I enter code

[rafal]

So I have to wait how ever many seconds it says in the box before I enter code

have a look on parameters................

[aaron2020]

OK thank you I will have a look tomorrow

[aaron2020]

Hi it says lock time on engine and immo 0.0

[cristyand]

If your case is akl I don't tkink you can do The job with Vcds. I had that situation and made a key with vvdi 2 after comfort module dump. With working key you can program obd.

[aaron2020]

Hi really sorry its my mistake I tried the code in other units and it worked its asking for security code not my sck number lol. Does anyone have a list of the security accsess codes please. Thanks to all that helped with skc number. Much appreciated

[dtip]

what are you trying to do?

[aaron2020]

Hi I'm just looking through the systems I have to see what I can add and what settings can be changed