PDA

View Full Version : Immo OFF - Ford MED17.2.2 TC1797



aqua_life
30th November, 2020, 08:59 AM
Hello,


I am trying to make Immo OFF on this project car with engine Ford 2.3 Ecoboost.
Engine ECU is MED17.2.2 with TC1797
Attached I send Flash + eeprom.


I already tried the usual 0F F4 80 20 8B 02 20 22 without success.


I have car here and can try how many times needed.


Many thanks for your help.

vladanr
30th November, 2020, 03:46 PM
765296 try this

alefabi2006
30th November, 2020, 06:05 PM
please try this solution and report

aqua_life
30th November, 2020, 06:40 PM
Thanks for your help.
I tested your solutions but don´t work.

Any other ideas ? :winky: Car is here to try

brend
30th November, 2020, 06:50 PM
Thanks for your help.
I tested your solutions but don´t work.

Any other ideas ? :winky: Car is here to try


Don't forget report........765375

Here immo off.......

alefabi2006
30th November, 2020, 06:58 PM
not on my part. information BREND solution

aqua_life
30th November, 2020, 07:09 PM
brend, thanks for your help. Already tried that solution.
On my Flash file I can find 3 times: "0F F4 80 20 8B 02 20 22"
I already tried replacing on all of them from "8B 02 20 22" to "00 00 82 12"
Tried 3 together, 2 together and 1 each time.
Always same result, don´t start.

Any other idea ?

Thanks for your help

rafal
30th November, 2020, 07:57 PM
1st -have you done cs?
2nd - is it 100% immo problem?

alefabi2006
30th November, 2020, 08:05 PM
[QUOTE = rafal; 4008907] 1º -¿Has hecho cs?
2º - ¿Es un problema de inmovilización del 100%? [/ QUOTE]

cs ok done in my file. I also doubt that it is an immo mistake

aqua_life
30th November, 2020, 08:22 PM
Yes, I am writing Flash files with PCM Flash and I see that it automatically correct Check Sum.

Yes, it is 100% Immo problem. This is a race car with this engine installed and we are trying to make Immo OFF to avoid having cluster or other ECU´s.
I am sure only problem is Immo now because customer has other ECU by Ford motorsport and if we plug this ECU engine starts.
However this is a special ECU and we are not allowed to open it and read content. Already tried to convince customer to open and read this "special" ECU but we can´t.
So, we must try to make Immo OFF on original ECU.

If anyone has ideas please let me know. I will try !
Thanks for your help

turbocluck
27th April, 2021, 04:46 PM
Any luck Aqua_life? I'm literally in the same boat.

avital
27th April, 2021, 10:35 PM
There is a solution for this system, no need to modify the contents of the ECU. It consists in installing a special custom edition the immoemulator.