isn to cas3++ Mini

[rob h]

Hello guys,

Mini 2008 with cas3++ akl.
And no ecu.


So i now have a new mevd172 ecu, with isn.
I tried writing isn into org cas3++, vvdi2 stated not supported.


Can someone write this isn into the cas3++?
Or is that not possible, because it is a akl cas3++?

Thanks guys
766970

[Chriz123]

not possible without old key or isn...

[rob h]

The remote still works,
But no transponder signal.
I replaced the coil.
No improvemend.
I Will look for another key, and swapp eeprom.
Maybe that Will work.

[KriptoKey]

Transmission is 6HP or is it 8HP?
I wonder if I give you a file with your ISN, can you program a new key?
Let me know
Cheers

[fixanycar]

I don't think the key is an issue.
Renew and rewrite it will be an option.
Need to write DME isn into cas via OBD while writing a key. Kinda messy for me all the time I do 3++

Sent from my HD1905 using Tapatalk

[ASCM]

Can you post cas I'd readed by vvdi 2

Sent from my SM-J415F using Tapatalk

[Gavra]

Downgrade, write ISN, upgrade, take money

[ASCM]

Maybe vvdi 2 don't support this
ID FW for downgrade

Sent from my SM-J415F using Tapatalk

[Chriz123]

you are sayin AKL but the remote is working?!
did you make a key or do you have an old key ?!

[rob h]

It is a manual gearbox.

The key belonged to the org car, cas3++. So yes it is a old key.
I called it akl, because it did not start. Only open and close by remote

I replaced the transponder antenna coil, and reflowed the pcf.
That did not work.

I did not downgrade, and then tried writing isn.
Only tried write isn to cas3++ as is.
I will try that.


flash version is
9389115

I dont have a cas3 key oem.
Could i transfer the pcf to a cas4 smart key?
I have seen some retrofit keys.
This might bring the key to live.

[pepi]

Try to find used key , that will be best option . You cant transfer on CAS4 smart key.

[Chriz123]

pls stop tryin something when you dont have any idea what are doing

post untouched cas eeprom (i guess post1 file)
read and post key psw / page3 cfg, if you didnt destroyed the key (maybe need place back old coil) or better read second key if aviable

[rob h]

I have just transfered the pcf7945 to a chinese cas4 key.
Now i have the org isn from the key.


I will try to change the isn tommorow.

The eeprom, i posted is untouched.
And the isn is A10C0E794A62E11A2DC4DE50CDD6479E

Thanks guys

[Chriz123]

why so complicated :D
here youre file pass pm