PDA

View Full Version : Nissan EDC16CP33 DPF off



Fec001
10th December, 2020, 07:43 PM
Hi!
Anyone knows a 100% working solution with disconnected sensors?
I got few files with some DTC erased and 5-6 bytes changed but more needed for sensor emulation..........
I'm ready to pay for good solution.

Ivana31
10th December, 2020, 08:31 PM
DPF OFF, TESTED SOLUTION!
CHECK YOUR PM

Tawe
10th December, 2020, 08:33 PM
Hi!
Anyone knows a 100% working solution with disconnected sensors?
I got few files with some DTC erased and 5-6 bytes changed but more needed for sensor emulation..........
I'm ready to pay for good solution.
Here is solution that I use :) Pass sent by PM.

Fec001
15th December, 2020, 08:37 PM
So with some files DPF problem seems solved but I have 1 more problem. If I accelerate harder, then I have power until 3000 RPM and suddenly loss power like limp mode. If I depress accelerator pedal and accelerate again, I have power again until 3000 RPM. DTC: P047B-64 Exhaust pressure sensor B. I think this connects to the exhaust press. sensor in the exhaust manifold. Unfortunatelly KTS and Launch x431 cannot show the pressure reading of this sensor. Launch can show the voltage reading and seems ok (0.89V on idle and goes up about 2.5V).
-Tried to change sensor but it doesnt solve the problem.
-Tried to set back everything to original, ECU SW, DPF sensors and same problem
Anyone has got idea?

Flisting
15th December, 2020, 11:35 PM
Linearisation curve of exhaust pressure sensor B - OFF
And problem solved ;)

Fec001
6th January, 2021, 03:54 PM
Can someone confirm that the linearistaion of exhaust pressure sensor is at 1C53C2 2x1?