Great Wall Steed 6 DCM3.7 + immo sync

[jackeldestripador]

Hi pals just asking for some tip to syncronize some Great Wall Steed 6 with Delphi DCM3.7AP with immo 3605130-p00. I have tryed with launch X431 to sync key and match whole system but no success. I managed to write VIN in ecm but x431 when i try to sync with ecm shows fault writing keys. Some idea how to do it? I have tryed with ecm virgin too but no success either.

Pin 7751

[jackeldestripador]

someone has some DCM3.7AP full dump with pin?

[Holmae]

Hi
i have same problem have you solve it

[br556hre]

How did you read this flash you posted, is it factory original, can you write details about car engine (swirl, dpf..), transmission type?

[Holmae]

Great Wall wingle 6 with Delphi DCM3.7AP with immo 3605130-p00

[krimoalg]

Help me pleas
My immo box delphi
Vin : LGWDBC174EB627425

[Holmae]

Help me pleas
My immo box delphi
Vin : LGWDBC174EB627425
Send dump immo box

[miroopel]

Help me pleas
My immo box delphi
Vin : LGWDBC174EB627425

PIN to VIN BC11 / 51B5 / 747A / 747AD41A

or read eeprom immobox

[Pablitocrpz]

Hi pals just asking for some tip to syncronize some Great Wall Steed 6 with Delphi DCM3.7AP with immo 3605130-p00. I have tryed with launch X431 to sync key and match whole system but no success. I managed to write VIN in ecm but x431 when i try to sync with ecm shows fault writing keys. Some idea how to do it? I have tryed with ecm virgin too but no success either.

Pin 7751
Hello Jack, did you get lucky syncronising the immo/ecu ? I have same situation but different ECU.... same immo box, I get new ECU from dealer but system won't sincronize, I believe for whole system Sincronize you need both ECUS new (ECU+IMMOBOX) I'm needind a virgen file for immo ​3605130-p00

[Pablitocrpz]

I get from a new virgen immo box, hope this can be helpfull for many peopple. PinCode 0000

[Holmae]

I get from a new virgen immo box, hope this can be helpfull for many peopple

Have you solve to sychronise it

[Pablitocrpz]

Hello Holmae, for GreatWall SYNC the immo box with engine Ecu you will need one from two things: 1- full backup copy of both files "Immo & ECU" to restore in used Ecus or 2- both Ecus in New state / virgen files. So you can start the precess for programming/sync againg.

If you use new virgen files/Ecus the pin code is 0000

[Dzeepromer]

Hi, i have same probleme with Great wall haval H5, how i can file from ECU virgin ? for syncro with Immobox ?
a battery terminal inversion error damaged my ECU file, I put a file from another car, the check came back, I want to synchronize with my immobox, thank you

[avital]

Currently available is an immobilizer emulator to replace the original DELPHI immobilizer module, tested with DCM3.7AP 3612100-ED01A ECU used in GWM , also works with other ECUs that work with the DELPHI immobilizer model 3605130-P00 used in Great Wall, replacing this immobox.

[phl0at]

Can you name the emulator please?

[avital]

I haven't given it a name yet - let's call it the GWM immo emulator :)
In your case to use the emulator you need to have a working undamaged eeprom content to download the synchrobytes to the emulator.

[uio_boy]

hi, maybe my comment is way out of date but no need to cahnge anything, in this car is very common that immo got unsync, causes are from a low volatage battery or by made a repro. You have to read the pin code from immo module or buy it, write down the vin. With those 2 things you need the car with all the kets you are going to program and remotes, you can use xpad2 or autel im 508 or 608, then you go to immo, reset ecu and immo box, in this step pin code is going to be needed, then you go to teh option that said sync the whole system, then is going to ask for the keys, you can reuse them, with this car start, then go to tthe part that said learn remotes, you have to push both buttons when the machine told you and that is all, a 20 min job.

[AutoGeek]

hi, maybe my comment is way out of date but no need to cahnge anything, in this car is very common that immo got unsync, causes are from a low volatage battery or by made a repro. You have to read the pin code from immo module or buy it, write down the vin. With those 2 things you need the car with all the kets you are going to program and remotes, you can use xpad2 or autel im 508 or 608, then you go to immo, reset ecu and immo box, in this step pin code is going to be needed, then you go to teh option that said sync the whole system, then is going to ask for the keys, you can reuse them, with this car start, then go to tthe part that said learn remotes, you have to push both buttons when the machine told you and that is all, a 20 min job.

This is exactly what i did and all worked well......