PDA

View Full Version : Change km on Dacia Lodgy 2019



alclot
15th December, 2020, 09:36 AM
Hi mates,
This car went to Renault garage and there I dont know how puted on car more than 10k km. Now my client sent to me dash and abs to calibrate km to original. I´ve never done and car is so far. The question is if I can do the mod only with units and where is located this info please.
Thanks alot in advance ;)

momogsm
15th December, 2020, 10:35 AM
Hi

For This Dacia, Dashboard And Abs Modify Is Enough, For Dash Mileage Is Stored In Fujitsu MB96F6A6, And For ABS Mileage Is Stored In Eeprom 95128/25C128,

Good Luck

marina_rv
15th December, 2020, 03:38 PM
Hi mates,
This car went to Renault garage and there I dont know how puted on car more than 10k km. Now my client sent to me dash and abs to calibrate km to original. I´ve never done and car is so far. The question is if I can do the mod only with units and where is located this info please.
Thanks alot in advance ;)

dash V16.00 or V18.00 ???

alclot
15th December, 2020, 03:44 PM
Hi mate,
V16.


dash V16.00 or V18.00 ???

marina_rv
16th December, 2020, 10:32 AM
dash read + write CAN pinout.
ABS read eep programmer.

alclot
21st December, 2020, 09:12 PM
Hi mates,
I see carprog can do dash but I read too the procedure is dangerous and a few people doing by carprog dash get faulty. What interface is the best without damage dash?
About abs, can anyone help me with location of ee or pinout about read it please?
Thanks a lot

catalinosonesti
21st December, 2020, 09:18 PM
hi
carprog read and write too abs module by OBD ,
frist to start chek you laptop batery to be load , make internet conection to laptop ,update your carprog ,and good luck .
best regrads