Hardcut software development for opel

[chrisimerk]

Hi guys I'm testing out a hardcut/ignition cut limiter software only for opel which I'm developing for the engine code and ecu type below.

A16LET/Z16LER/Z20LEL/Z20LER/Z20LET/
Z20LEH

ME7.6.2

ME1.5.5

Let me know what rpm you would like it set at.
I'm only doing a few.

Please leave a video of the effect.

[99RYN]

Please help with Hardcut on my Z20LER on 4300 rpm
I ll back with video (i have a nice exhaust ! :D )

[chrisimerk]

Please help with Hardcut on my Z20LER on 4300 rpm
I ll back with video (i have a nice exhaust ! :D )

are you sure you want it that low?

also your archive is corrupt upload again

[99RYN]

I archived again, there are 2 softwares one l stock with lambda probe canceled, and one l with rev cut from 2500rpm, and from 4300rpm to be able to run in normal mode, or if it can be activated from the sport button would be a dream! The one with stage1 and revcut is not completely executed ok, at 2600rpm it cuts off the power supply and the car goes defeated ...
I archived again, there are 2 softwares one l stock with lambda probe canceled, and one l with rev cut from 2500rpm, and from 4300rpm to be able to run in normal mode, or if it can be activated from the sport button would be a dream! The one with stage1 and revcut is not completely executed ok, at 2600rpm it cuts off the power supply and the car goes defeated ...

[chrisimerk]

i would say that rpm for ignition cut is too low mate

[chrisimerk]

I archived again, there are 2 softwares one l stock with lambda probe canceled, and one l with rev cut from 2500rpm, and from 4300rpm to be able to run in normal mode, or if it can be activated from the sport button would be a dream! The one with stage1 and revcut is not completely executed ok, at 2600rpm it cuts off the power supply and the car goes defeated ...
I archived again, there are 2 softwares one l stock with lambda probe canceled, and one l with rev cut from 2500rpm, and from 4300rpm to be able to run in normal mode, or if it can be activated from the sport button would be a dream! The one with stage1 and revcut is not completely executed ok, at 2600rpm it cuts off the power supply and the car goes defeated ...

Here i modify the lambda off file hc at 6700rpm im not messing with files that are rubbish and are not working correctly

enjoy
pass in pm

[daveybee365]

chris, could you give me a msg please. i have a few gsi,vxr questions

[projohnny]

hi could you do my brothers astra vxr its got centre box and back box still in place but has both cats removed will this still be ok for ignition cut?

[chrisimerk]

hi could you do my brothers astra vxr its got centre box and back box still in place but has both cats removed will this still be ok for ignition cut?

here test and report and yes with your centre box and back box still in place it will effect the sound and outcome of the cut. no flames etc....

pass in pm

dont forget to post video

[projohnny]

here test and report and yes with your centre box and back box still in place it will effect the sound and outcome of the cut. no flames etc....

pass in pm

dont forget to post video

thanks will get back to you shortly with video

[projohnny]

Thanks alot bro is sounds amazing its very loud i will maybe delete centre box for flames

again thnaks alot i have attached videos of your work the videos dont do it justice tho lol

[projohnny]

sorry it wouldnt let me post videos here they are

[ivaka]

Hi can someone make to my file Hardcut

[Djoisan]

Can you explain how you install it on you computer?

[brookmckemie2]

Can anyone suggest any courses so that I can upgrade my qualifications to a developer? I just recently started studying programming, and it's hard enough for me now because of the insufficient amount of knowledge in the field of development. I can code well, but not enough to get me into a good company, so I'm looking for ways to develop professionally as a specialist. I aim to get a job at the software solution provider (https://www.exposit.com/) company since these guys do big indoor projects, and I dream of being part of their team. I hope to succeed as soon as possible, but I am ready to spend a lot of time and effort training.