PDA

View Full Version : Audi A6 3.0TDi Limpmode Disable


alonso66
21st December, 2020, 02:19 PM
Hi, i need your help.

The car is limpmode but no errors appear, the car is original.

HW: 4F0907401B
SW: 379480

this is the original file.

Thank you.
Johnsy1998
21st December, 2020, 02:20 PM
You using VCDS?
alonso66
21st December, 2020, 02:25 PM
You using VCDS?

Yes, and the car shortly after being started, demands 1600mb of pressure and 780 bars of rail, the accelerator appears at 100.6% and the accelerator torque demand becomes about 270Nm.

Thanks
bobolin4o
21st December, 2020, 04:07 PM
No way to have "Limp mode" without error codes, with ORIGINAL file!!!
alonso66
21st December, 2020, 04:20 PM
No way to have "Limp mode" without error codes, with ORIGINAL file!!!

you have the car reading in the first post of the thread so you can check that it is original