PCR2.1 problem reading with Galleto 54 firmware 0386

[tihiuvek]

Hello,

I can not read PCR2.1 ecu in boot or OBD mode.
Car starts OK.
I did boot connection with 560 and 1K ohm resistor as in description.
In my FGTech 54 I do not have read by OBD these ecu.
But in FGTech V54 firmware 0475 there is OBD read option.
Did anybody succeed to read with tool 0386 as BDM?
Thanks!

[kospoz]

In bootmode only eeprom can be read.
Flash only with obd

[chrisimerk]

Hello,

I can not read PCR2.1 ecu in boot or OBD mode.
Car starts OK.
I did boot connection with 560 and 1K ohm resistor as in description.
In my FGTech 54 I do not have read by OBD these ecu.
But in FGTech V54 firmware 0475 there is OBD read option.
Did anybody succeed to read with tool 0386 as BDM?
Thanks!

with PCR2.1 you need to unlock first with either ktag or kess with infineon module kess have no problem reading these via obd you just need to unlock first before writing plenty of videos on youtube.

regards

[tihiuvek]

So I have to move on tool 0475?
I got KTAG and FGTech only.
Can somebody please, post link to Fantomel update?
All links on Mega are dead.
Thanks!

[figani]

you can read write by ee by programmer...
post it here and someone will unlock it for you...
write back ee...

read write flash by obd...

[kospoz]

maybe fg has canbus problem like mine (both tools 2 firmwares) when you connect to car give you id?

[tihiuvek]

In my FGTech there is no option to read PCR2.1 ECU not even OBD. I got PCR2.1 unprotected tool and boot read infineon only.
I am searching Fantomel upgrade to tool 0475 but for the moment no any active link for software and firmware.
I checked on Audi, Seat, Skoda and VW but no PCR2.1