ECU EDC16C3 Peugeot to Virgin Mode

[carmelasse]

Please help me change to virgin (new) ECU EDC16C3 47 from Peugeot 307 year 2003 1.4HDI engine.
Used ECU have which I want to fit to the car.
This is dump from eeprom 95150:

[jupiter72]

Please help me change to virgin (new) ECU EDC16C3 47 from Peugeot 307 year 2003 1.4HDI engine.
Used ECU have which I want to fit to the car.
This is dump from eeprom 95150:
Try it!
it is virgin file

[jupiter72]

Please help me change to virgin (new) ECU EDC16C3 47 from Peugeot 307 year 2003 1.4HDI engine.
Used ECU have which I want to fit to the car.
This is dump from eeprom 95150:
Sorry the file is here

[carmelasse]

Thx, but your file is from EDC16C34 and it is completely diffrent from my (EDC16C3).

Still need help...

[carmelasse]

Or, how to write down new PIN to my file?
A need write down PIN - P5GT. (im*oKiller writes down PIN but wrong).

[MEH]

HI

DIDI YOU FIND FILE VIRGIN DUMP?
whats the difference between EDC16C3 AND EDC16C34
THIS NOT THE "DPF" THE DIFFERENCE?

[benci1982]

virgin files edc16c34 (1,6hdi) and edc16c39 (1,4hdi)

[crackintosh]

That's is what U R looking for?

[charly_joe]

Hi All - wonder if you can please help me here? I have a 2005 Peugeot 307 1.6 HDI with corrupt ECU maybe BSI and needs crash data cleared from the Airbag ECU.

I have bought a Galleto 1260 cable and I am trying to read the ECU file from it but it always comes up with an error and never reads the file. The driver for the cable is installed ok as the Galetto app sees the interface but it gets 50% then always tells me to turn off engine and back on again and never reads it.

Can anyone please offer any assistance?

Cheers

[charly_joe]

Hi I have managed to identify the ECU using my Galleto cable.

.BOSCH EDC16C34/
MPC561/RevC CC_OFF 56/56/20
:1037371084
96 53 95 89 80
96 59 34 19 80

I want to upload a virgin ECU, BSI and clear crash data from airbag module on this car.

When I try to read the data in Galleto I get the following error:
READING ECU
Start reading...ERRORE SK1
Errore seed key

and it does not finish reading it.

Can anyone offer any assistance with any of the above?

Thanks in advance

[satinfo]

Hi All - wonder if you can please help me here? I have a 2005 Peugeot 307 1.6 HDI with corrupt ECU maybe BSI and needs crash data cleared from the Airbag ECU.

I have bought a Galleto 1260 cable and I am trying to read the ECU file from it but it always comes up with an error and never reads the file. The driver for the cable is installed ok as the Galetto app sees the interface but it gets 50% then always tells me to turn off engine and back on again and never reads it.

Can anyone please offer any assistance?

Cheers

and i have just the same problem with my peugeot 206CC model 2003.
anybody can help:hmmmm2:

[emilioalmeda]

and i have just the same problem with my peugeot 206CC model 2003.
anybody can help:hmmmm2:

hi
have solved the problem with the 206cc, which does not read and can not read GALLETTO airbag ECU.
can you tell me you did

[basset-bo]

thank you ECU EDC16C3 Peugeot to Virgin Mode

[horce]

Hi I wonder why I can not get programs

[iurcaberciu]

pleasse explain how coding new ecu .explain step by step. after virginize rcu connect by car mariage bsi and ecu , next step coding , ok , bat next step adaptation new injector , put old value of injector, bat ecu sys . wrong injector. .pleasse hellp . ps. i put value for all injector. FFFFFFFF . I USSE ppS 2000 . CAR IS PEU.307 YAR 2007

THANCK MIRCEA

[hafido1983]

That's is what U R looking for?
thanks i take this virgin file and when i want to program it with PPS gives message not programm what i do?
this file virgin or no
thanks in advance

[khalilo814]

thanks i take this virgin file and when i want to program it with PPS gives message not programm what i do?
this file virgin or no
thanks in advance

it's not the good dump for your ecu the best way is to posting your dump and set it to immo off for you

[armin285]

can you post the dump?

[armin285]

Please help me change to virgin (new) ECU EDC16C3 47 from Peugeot 307 year 2003 1.4HDI engine.
Used ECU have which I want to fit to the car.
This is dump from eeprom 95150:
heve you the full bdm fille?